Determination of Residual Organic Solvents in Poly(lactic-co-glycolide)
Fang-wen SHUAI,Jia-wei ZHANG,Xiang-feng WANG,Ting ZHANG,Yu-tong WANG,Hong-hao ZHOU
DOI: https://doi.org/10.3870/yydb.2014.06.025
2014-01-01
Abstract:Objective To establish a capillary gas chromatography( GC)method for the determination of residual organic solvents in poly( lactic-co-glycolide)( PLGA),including methanol,acetone,dichloromethane,and toluene. Methods A capillary GC method was carried out. DB-624 capillary column(30 m× 0. 32 mm,1. 80 μm)with programmed temperature chromatography was employed. The initial temperature was kept at 40 ℃ for 8 min. Then the temperature was raised to 200 ℃ at a rate of 10 ℃·min-1 . The injection port temperature was 180 ℃,and the split ratio was 10:1. The carrier gas was nitrogen. The temperature of FID was set at 250 ℃,and the sample volume was set at 3 μL. Results Four residual organic solvents consisting of methanol,acetone,dichloromethane and toluene in PLGA were completely separated. The linear range of concentration of methanol,acetone,dichloromethane and toluene was within 10. 0-50. 0( r=0. 999 8 ),16. 7-83. 3( r=0.9998),2.0-10.0(r=0.9993),and3.0-14.8(r=0.9997)μg·mL-1,respectively.Therecoveryofmethanol,acetone, dichloromethane and toluene was 99. 9%( RSD=1. 5%),100. 8%( RSD=0. 9%),100. 1%( RSD=1. 1%),and 99. 5%(RSD=0. 6%),respectively. Six batches of samples met the requirements. Conclusion The method is proven to be sensitive and accurate after the validation. It is suitable for the determination of residual organic solvents in PLGA.