Abstract:The feasibility of the reduction of oxygen carrier Fe2O3 in chemical-looping combustion using solid fuel (lignite) provided a gasifying agent like steam was introduced into the reactor was investigated with a fixed-bed reactor. The X-ray diffractometer and scanning electron microscope were used for the characterization of the Fe2O3 and its reduction residue. Results strongly supported the feasibility of Fe2O3 reduction by lignite and obtaining pure CO2 from the off-gases. Fe2O3 can be fully converted to Fe3O4 by pyrolysis and gasification intermediates primarily H2 and CO, which was confirmed by both the off-gas concentrations and X-ray diffractometer analysis. A 0.75 g portion of Fe2O3 can be completely reduced to Fe3O4 by the volatile matter released from 0.1 g coal, and Fe2O3 can be fully reduced to Fe3O4 by steam char gasification products provided that the molar ratio of carbon in char to Fe2O3 is 1:6. The purity of CO2 in the outlet gases was higher than 85% when Fe2O3 was reduced by intermediate products during coal pyrolysis, and the purity of CO2 in the off-gases was higher than 95% when Fe2O3 was reduced by intermediate products resulting from steam char gasification, making CO2 sequestration disposal desirable for high purity CO2. The char gasification reaction rate was slow compared with the reactivity of the iron oxide with the char gasified intermediates, indicating that char gasification was the rate-limiting step in the reduction process. In the steam char gasification process, the times it took to reach 90% carbon conversion for K-10-char and Ca-10-char were 15 and 30 min, respectively, at 1123 K, but the time for the raw char was 50 min at 1173 K.

Reduction Behavior of Iron Oxide Sorbent and Its Effect on Sulfidation

Study of intrinsic sulfidation behavior of Fe2O3 for high temperature H2S removal

Testing of Iron Oxide Sorbent for High-Temperature Coal Gas Desulfurization

Effect of Calcium Oxide Additive on the Performance of Iron Oxide Sorbent for High-Temperature Coal Gas Desulfurization

Comparison of Reduction Behavior of Fe2O3, ZnO and ZnFe2O4 by TPR Technique

Thermogravimetric-thermomagnetic study on reduction and sulfidation of iron oxide high temperature desulfurizer

A comparative study of the effect of clay binders on iron oxide sorbent in the high-temperature removal of hydrogen sulfide

Preparation of Sulfur Dioxide by Divalent Iron Synergistic Coke Reduction of Phosphogypsum in a Fluidized Bed

Desulfurization performance of iron-manganese-based sorbent for hot coal gas

Removal of sulfur at high temperatures using iron-based sorbents supported on fine coal ash

Study on the Stability of Sorbents Removing H2S from Hot Coal Gas

Study on Reduction and Sulfidation of ZnFe_2O_4 Desulfurizer at High Temperature

Reduction of SO2 to Elemental Sulfur over Rare Earth-Iron Catalysts

Reduction of SO_2 to elemental sulfur over rare earth-iron catalysts

Desulfurization Behavior of Fe–Mn-Based Regenerable Sorbents for High-Temperature H2S Removal

Influence of Dust on High Temperature Desulfurization of Iron Oxide Sorbent

Equilibrium and Experimental Study on Carbothermal Reduction of Sulfur Dioxide to Elemental Sulfur

Kinetics of the high temperature desulfurization with mixed iron-calcium oxides in temperature programmed processes

Reduction of Iron Oxide as an Oxygen Carrier by Coal Pyrolysis and Steam Char Gasification Intermediate Products

Kinetic Analysis of Isothermal and Non-Isothermal Reduction of Iron Ore Fines in Hydrogen Atmosphere

Thermogravimetric Study of CuO/γ-Al<sub>2</sub>O<sub>3</sub>Sorbents for SO<sub>2</sub>in Simulated Flue Gas