Abstract:Control of wettability of diamond surfaces is important for many applications, including chemical sensors, electronic devices based on surface conductivity, electrochemistry, biomolecules immobilization. The contact angle for liquid droplet is sensitive to crystallographic orientation of the facet. We report on the wetting dynamics for single crystal diamond (SCD) plates with low-index planes (111), (100), (110), and for polycrystalline diamond (PCD) film with mixed grain orientations, subjected to different surface treatments – hydrogenation, thermal oxidation and UV-ozone exposure. Also, advancing angle of (311) plane in undersaturated vapor conditions was studied. The water spreading kinetics was monitored by measuring temporal dynamics of the contact angle θ at room temperature in a saturated vapor atmosphere for prolonged time, up to 60 h Depending on surface state it took a few minutes to several hours to approach the equilibrium contact angle. It was shown that the transition from hydrogenated surfaces to thermally oxidized and then to ozonized ones is accompanied by a significant surface hydrophilization of all the facets studied. The oxidized and ozonized surfaces reveal faster dynamics of θ equilibration in comparison with that for H-terminated diamond. The plane orientation noticeably affects the contact angle: the measured difference Δ θ for the diamond planes is significant, especially for ozonized surfaces (Δ θ up to 17°), as a consequence of the difference in chemical structure and composition for those facets. Finally, the wetting of polished coarse-grain PCD is discussed by taking into account a spread in the grain orientation and pinning effect for the drop spreading on nanosteps on the grain boundaries.

Reversible Wettability on Polycrystalline Diamond Films Between Superhydrophobicity and Superhydrophilicity

The Water Wettability Of The Hydrogenated And Oxygenated Diamond Films

Natural Hydrophobicity and Reversible Wettability Conversion of Flat Anatase TiO₂ Thin Film.

Reversible superhydrophobic-superhydrophilic transition of ZnO nanorod/epoxy composite films.

Effect of Surface Morphology on Wettability Conversion

Reversible Wettability of a Chemical Vapor Deposition Prepared ZnO Film Between Superhydrophobicity and Superhydrophilicity

Dynamic wetting of low-index diamond planes and polycrystalline diamond with H-terminated and O-terminated surfaces

Tunable Wettability and Rewritable Wettability Gradient from Superhydrophilicity to Superhydrophobicity

A strategy of fast reversible wettability changes of WO3 surfaces between superhydrophilicity and superhydrophobicity.

Rapid, Ultraviolet-Induced, Reversibly Switchable Wettability of Superhydrophobic/superhydrophilic Surfaces

Oxygen-Terminated Polycrystalline Boron-Doped Diamond Superhydrophobic Surface with Excellent Mechanical and Thermal Stabilities

Thermal/Plasma-Driven Reversible Wettability Switching Of A Bare Gold Film On A Poly(Dimethylsiloxane) Surface By Electroless Plating

Temperature-Responsive, Femtosecond Laser-Ablated Ceramic Surfaces with Switchable Wettability for On-Demand Droplet Transfer

Rapidly Reversible Superwettability on Textured Metallic Surfaces

Reversible Wettability Switch of Large Area Tio2 Films

Reversible Control of Under-oil Superhydrophobicity to Superhydrophilicity on TiO2 Nanostructured Thin Film

Smart Responsive Surfaces Switching Reversibly Between Super-Hydrophobicity and Super-Hydrophilicity

Wettability Conversion from Superoleophobic to Superhydrophilic on Titania/Single-Walled Carbon Nanotube Composite Coatings

Reversible Surface Wettability Conversion of ZnO Film

Reversible Switching Between Isotropic and Anisotropic Wetting by One-Direction Curvature Tuning on Flexible Superhydrophobic Surfaces

Reversible Hydrophobicity-Hydrophilicity Transition Modulated by Surface Curvature.