Thermoplastic Starch with Maltodextrin: Preparation, Morphology, Rheology, and Mechanical Properties
Lata Rana,Saffana Kouka,Veronika Gajdosova,Beata Strachota,Magdalena Konefał,Vaclav Pokorny,Ewa Pavlova,Zdenek Stary,Jaroslav Lukes,Marek Patocka,Veronika Hegrova,Ivan Fortelny,Miroslav Slouf
DOI: https://doi.org/10.3390/ma17225474
IF: 3.4
2024-11-10
Materials
Abstract:This work describes the preparation of highly homogeneous thermoplastic starches (TPS's) with the addition of 0, 5, or 10 wt.% of maltodextrin (MD) and 0 or 3 wt.% of TiO2 nanoparticles. The TPS preparation was based on a two-step preparation protocol, which consisted in solution casting (SC) followed by melt mixing (MM). Rheology measurements at the typical starch processing temperature (120 °C) demonstrated that maltodextrin acted as a lubricating agent, which decreased the viscosity of the system. Consequently, the in situ measurement during the MM confirmed that the torque moments and real processing temperatures of all TPS/MD systems decreased in comparison with the pure TPS. The detailed characterization of morphology, thermomechanical properties, and local mechanical properties revealed that the viscosity decrease was accompanied by a slight decrease in the system homogeneity. The changes in the real processing temperatures might be quite moderate (ca 2–3 °C), but maltodextrin is a cheap and easy-to-add modifier, and the milder processing conditions are advantageous for both technical applications (energy savings) and biomedical applications (beneficial for temperature-sensitive additives, such as antibiotics).
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering