KINEMATIC ANALYSIS AND EXPERIMENT OF CORN STRAW SPREADING PROCESS
Liu Peng,Zhang Zhiqiang,He Jin,Li Hongwen,Wang Qingjie,Lu Caiyun,Lou Shangyi,Liu Wenzheng,Cheng Xiupei
DOI: https://doi.org/10.35633/inmateh-58-09
2019-01-01
Abstract:Aiming at solving the problem of corn straw uneven-distribution of straw retention machine in North China, based on kinematic analysis, the straw spreading process and its straw dynamics model was studied. Then, effects of spreading angle (SA), spreading deflection angle (SDA) and height of guide vane (HGV) on straw spreading distance, width and uniformity were analyzed. Taking SA, SDA and HGV as experimental factors, the straw spreading distance, width and uniformity were used as experimental indicators. Then the optimization experiment of Box-Behnken design corresponding surface was conducted to obtained batter operating parameter of experimental factors. Simultaneously, mathematical regression model of experimental factors and indicators was established. The test results shown that SA, SDA and HGV had extremely significant effects on width, distance and uniformity of straw spreading, respectively; The SA had extremely significant effect on straw spreading uniformity, the SDA and HGV had significant effect on straw spreading uniformity; The interaction between SA and SDA had extremely significant effect on straw spreading distance and significant effect on spreading uniformity. Furthermore, through parameter optimization test, the better combination of parameters of SA, SDA and HGV were 20 degrees, 11.51 degrees, and 1.12m, respectively. By field test under working condition of better parameters combination, the test results shown that width, distance and uniformity of straw spreading was 2.58m, 3.89m and 95.8%, respectively. The error between the test and theoretical prediction value was less than 5%, proved the accuracy of the model. The study can provide theoretical reference for parameters design of straw choppers.