Investigation on Injection Characteristics of Gas-to-Liquid Fuel

WU Tao,MIAO Xue-long,YIN Qi,ZHOU Xiao-ping,QIAO Xin-qi,HUANG Zhen

DOI: https://doi.org/10.3321/j.issn:1006-2467.2009.02.030

2009-01-01

Abstract:Fuel injection rate and fuel line pressure of GTL and conventional diesel fuels were measured on a fuel pump test bench and sound speed was calculated at various operating conditions.The results show that when the pump speed keeps constant,with the load increasing fuel injection rate and line pressure of pump and nozzle ends gradually increase;the locations of peak values for these parameters are delayed;the quantity of fuel injection per cycle increases significantly;the fuel injection duration prolongs.When the load keeps constant,with the speed increasing,the fuel injection rate of GTL increases and the maximum rate displays delayed;the quality of fuel injection per cycle increases;the fuel injection duration prolongs;the points of line pressure rising with both pump and nozzle ends move forward;the maximum pressures of the ends increase.When compared to diesel,at the same test points,GTL shows that the fuel injection rate and the peak values of line pressure at pump and nozzle ends are lower;the quantity of fuel injection per cycle is less;the fuel injection timing retards slightly;the fuel injection duration is shorter;and the sound speed of GTL is smaller.