Abstract:Phase separation kinetics of polyethylene copolymer blends polyethylene-co-hexene (PEH)/polyethylene-co-butene (PEB) at a phase separation temperature of 130 degrees C have been investigated through the combination of rheological measurements and optical microscope observation. When the blends are located in the unstable region, i.e., PEH/PEB 40/60 blend (H40), 50/50 blend (H50), and 60/40 blend (H60), due to the coeffect of the fast decay of concentration fluctuations and the reduced interfacial area, the stroage modulus, G', behaves dramatically, decreasing at the early or intermediate stages; while when the blends are located in the metastable region, i.e., PEH/PEB 70/30 blend (H70), G' decreases slightly and slowly during the whole time sweep process. During the cyclic frequency sweeps, G' evolutions of H50 and H70 show similar trends. Obviously different from the strong phase segregation systems, the increase of G' with time in the metastable region has not been observed, possibly due to the entanglement effects and weak interaction between the components of polyethylene blends. The interfacial tension-driven or diffusion-limited morphological evolutions of H50 and H70 during phase separation give direct interpretations to the viscoelastic difference between the two blends, which is dominated by different phase separation kinetics. The relatively low interfacial tensions at the late stage of phase separation for H50 (0.5-0.38 mN/m varying with time) and H70 (1.2 mN/m) can be estimated by using the Gramespacher-Meissner model.

Rheological behavior and miscibility of polypropylene and poly(ethylene-1-octene) blends

Influence of Composition and Phase Morphology on Rheological Properties of Polypropylene/poly(ethylene‐co‐octene) Blends

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Capillary and Torque Rheological Behaviors of PP/POE Blends

Non-isothermal Crystallization and Crystalline Structure of PP/POE Blends

Dynamic Mechanical Behavior and Prediction for PP/POE Blends

Morphology and Rheology of PP/POE Blends in High Shear Stress Field

Effects of viscosity ratio on properties and structure of PP/POE blends

Rheological Behavior and Nonisothermal Crystallization of Polypropylene/Epoxidized Natural Rubber Blends

Thermal Behaviors and Crystalline Structure of PP/POE Blends

Effect of composition distribution on miscibility and co-crystallization phenomena in the blends of low density polyethylene with conventional and metallocene-based ethylene–butene copolymers

Hierarchy structure in injection molded polypropylene/ethylene–octane copolymer blends

Non-Isothermal Crystallization Kinetics and Mechanical Properties of Polypropylene/Polyolefin Elastomer Blends

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

Morphology and Dynamic Mechanical Properties of High Density Polyethylene/petroleum Resin/polyethylene–octylene Elastomer Blends

Mechanical Properties and Morphology of Polypropylene/Poly(ethylene-co-octene) Blends

Dynamic Rheology and Thermal Stability of PTT/POE-g-MAH Blends

Size Distribution and Anisotropy of the Minor Phase Droplets in Polypropylene/Ethylene-Octene Copolymer Blends: Effects of Shear and Component Miscibility

Relationship between Microstructure and Mechanical Properties of Ethylene-Octene Copolymer Reinforced and Toughened PP

Investigation on Phase Separation Kinetics of Polyolefin Blends Through Combination of Viscoelasticity and Morphology.

Crystallization Behavior and Mechanical Properties of Polypropylene Random Copolymer/poly(ethylene‐octene) Blends