Abstract:Stabilizing piles are widely used as an effective and economic reinforcement approach for slopes. Reasonable designs of pile reinforcement depend on the understanding of reinforcement mechanism of slopes. A series of centrifuge model tests were conducted on the pile-reinforced slopes and corresponding unreinforced slopes under self-weight and vertical loading conditions. The deformation of the slope was measured using image-based analysis and employed to investigate the pile reinforcement mechanism. The test results showed that the piles significantly reduced the deformation and changed the deformation distribution of the slope, and prevented the failure occurred in the unreinforced slope. The pile influence zone was determined according to the inflection points on the distribution curves of horizontal displacement, which comprehensively described the features of the pile–slope interaction and the characteristics of reinforced slopes. The concepts of anti - shear effect and compression effect were proposed to quantitatively describe the restriction features of the piles on the deformation of the slope, namely the reduction in the shear deformation and the increase in the compression deformation, respectively. The pile reinforcement effect mainly occurred in the pile influence zone and decreased with increasing distance from the piles. There was a dominated compression effect in the vicinities of the piles. The compression effect developed upwards in the slope with a transmission to the anti - shear effect . The anti - shear effect became significantly dominated near the slip surface and prevented the failure that occurred in the unreinforced slope.

Mechanism Of Soil Slope Reinforced Using Nailing During Earthquake

DYNAMIC CENTRIFUGE MODELING TEST OF COHESIVE SOIL SLOPES REINFORCED WITH SOIL NAILING

Nail Reinforcement Mechanism of Cohesive Soil Slopes under Earthquake Conditions

Failure behavior and mechanism of slopes reinforced using soil nail wall under various loading conditions

Comparison Between Unreinforced and Soil Nail-Reinforced Cohesive Soil Slopes under Load Condition in Centrifuge Model Tests

Centrifuge Model Test Study on Pile Reinforcement Behavior of Cohesive Soil Slopes under Earthquake Conditions

Model Tests by Centrifuge of Soil Nail Reinforcements

Centrifuge Model Tests of Deformation and Failure of Nailing-Reinforced Slope under Vertical Surface Loading Conditions

Centrifugal Model Test On Behavior Of Strip Footing On Soil Nail-Reinforced Cohesive Soil Slopes

Failure behavior of soil nailing-reinforced slopes under drawdown conditions

Centrifuge Modeling Of A Geotextile-Reinforced Slope During Earthquake

Centrifuge modeling of soil nail reinforcements

Pile Reinforcement Behavior and Mechanism in a Soil Slope under Drawdown Conditions

Centrifuge modeling of cohesive soil slopes reinforced by stabilizing piles

Experimental Study on the Failure Mechanism of the Zhoujiashan Landslide under the Combined Effect of Rainfall and Earthquake in Tianshui City, Northwest China

Pile Reinforcement Mechanism of Soil Slopes

Pile-Reinforcement Behavior of Cohesive Soil Slopes: Numerical Modeling and Centrifuge Testing

Seismic performance of a nonhomogeneous slope reinforced by anchored piles using centrifuge tests

Three-Dimensional Modeling of Spatial Reinforcement of Soil Nails in A Field Slope under Surcharge Loads

Model test study on failure mechanism of soil nailing wall in loess area

Centrifuge Modeling of Dynamic Behavior of Pile-Reinforced Slopes During Earthquakes