Abstract:The shell-and-plate heat exchanger is a completely welded heat exchanger that combines the best features of a shell-and-tube heat exchanger with a plate heat exchanger. The flow between the circular corrugated plates behaves as a first expanding then converging flow, leading to the intricate nature of flow structures, flow resistance, and phase-change heat transfer. The present paper numerically investigates the flow behaviors and heat transfer characteristics in the channel between the circular corrugated plates of 0.2 m in diameter, 0.0022 in corrugation depth, and 75 degrees in corrugation angle. In the simulation, the gas velocity ranges from 0.25-6.00 m/s while the liquid velocity from 0.01-0.20 m/s. The wall is set as adiabatic and constant temperature condition of 350 K, respectively. For the single-phase flow, a longitudinal spiral flow along the main flow direction is formed, and the local velocity at the edge of the circular plate is generally higher and more turbulent than that in the central area. Additionally, the increase of Reynolds number leads to a more significant pressure drop but an apparent heat transfer enhancement. Based on the analysis of the friction factor and Nusselt number with Reynolds number, the empirical correlations for predicting the flow resistance and heat transfer characteristics in the channel are proposed. For the two-phase flow, we employed the VOF model to investigate the distribution of the phases in the downward flows. Compared with the experimental data, the numerical results are demonstrated to provide an accurate analysis of the phases distribution, particularly in the cross section of the channel. Accordingly, the flow patterns in the downward two-phase flows are identified as bubbly flow, slug flow, film flow, and churn flow. Based on the variation of the averaged void fraction, the film flow can be identified as alpha > 0.8 while bubbly flow as alpha < 0.5. Additionally, the void fraction in the cross section of the flow channel along the flow direction is analyzed in detail. Since the effect of the expansion and contraction of structures will go away with an increase in the gas mass flow rate, it can be anticipated that the effect of uniform distribution is more prominent for slug flow and is negligible for film flow.

Numerical Study on Convective Heat Transfer and Pressure Drop of Corrugated Tube

Numerical Simulation on the Convection Heat Transfer of a Single-tube Heat Exchanger at Turbulent Condition

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Numerical and experimental study of the heat transfer process in a double pipe heat exchanger with inner corrugated tubes

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Numerical simulation of flow boiling heat transfer and pressure drop in a corrugated plate heat exchanger at low mass flux and vapor quality conditions

Convective Heat Transfer and Pressure Drop of a Tube with Internal Longitudinal Fins

NUMERICAL STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN SHELL-AND-PLATE HEAT EXCHANGERS

Numerical Study of Flow and Heat Transfer Characteristics in Outward Convex Corrugated Tubes

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Experimental Study and Numerical Simulation on Convective Heat Transfer and Pressure Drop of Internally Longitudinal Finned Tube

Experimental Study on the Pressure Drop and Heat Transfer Characteristics in Corrugated Tubes

Numerical investigation on the effect of cylindrical turbulator on performance of corrugated plate-fin heat exchanger

Numerical Investigation Of Effect Of Tube Shape On Air-Side Heat Transfer And Pressure Drop Characteristics Of A Finned Tube Heat Exchanger

Numerical Investigation of Heat Transfer Performance of Rectangularly Coiled Pipes

Characterization of internal thermohydraulic flow and heat transfer improvement in a three‐dimensional circular corrugated tube surfaces based on numerical simulation and design of experiment

Numerical simulation of flow and heat transfer performance of tube-shell coupled helically coiled corrugated tube heat exchanger

INVESTIGATION ON HEAT TRANSFER ENHANCEMENT AND VELOCITY MATCHING IN HEAT EXCHANGERS BY USING CORRUGATED TUBES

Numerical Simulation and Experimental Study on Turbulent Flow in Shell Side of Shell-and-Tube Heat Exchangers

Numerical Investigation on Gas Flow Heat Transfer and Pressure Drop in the Shell Side of Spiral-Wound Heat Exchangers