Abstract:Studies on circulating fluidized bed (CFB) boilers have being conducted at the Tsinghua University (TH) for about two decades and much of works are done to link the fundamentals with practical application. A full set of design theory was developed and some key elements of this theory are presented in this paper. First, a classification of state of the solid-gas two-phase flow in CFB boiler is given. TH’s studies validated that a CFB boiler can be generally described as the superposition of a fast bed in the upper part with a bubbling bed or turbulent bed in the bottom part. A concept model of material balance for the open system of CFB boiler was developed and later improved as a more comprehensive 1-D model taking ash formation, particle attrition and segregation in bed into account. Some results of the models are discussed. Then the concept of State Specification of a CFB boiler is defined and discussed. The State Specification is regarded as the first step to design a CFB and a base to classify different style of CFB boiler technologies for various CFB boiler manufacturers. The State Specification adopted by major CFB boiler makers is summarized and associated importance issues are addressed. The heat transfer model originally developed by Leckner and his coworkers is adopted and improved. It is further calibrated with experimental data obtained on the commercial CFB boiler measurements. The principle, improvements and application of the model are introduced. Some special tools developed for heat transfer field test are also given. Also, combustion behaviors of char and volatile content are studied, and the combustion difference between a CFB boiler and a bubbling bed is analyzed. The influence of volatile content and size distribution is discussed. The concept of vertical distribution of combustion and heat in CFB boiler furnace is introduced and discussed as well. In the last, the suggested design theory of CFB boiler is summarized.

Design and operation of CFB boilerswith low bed inventory

Development of a Supercritical and an Ultra-Supercritical Circulating Fluidized Bed Boiler

The New Generation Combustion Technology for Energy Saving Circulating Fluidized Bed Boilers

Progress of circulating fluidized bed combustion technology in China: a review

Design Theory of Circulating Fluidized Bed Boilers

Latest Development of CFB Boilers in China

Research and Application of Supercritical and Ultra-supercritical Circulating Fluidized Bed Boiler Technology

On Design Of Cfbc Boilers

Novel CFB Boiler Technology with Reconstruction of its Fluidization State

Operational Status of 300mwe CFB Boiler in China

Operation Experience of a 116MW Circulating Fluidized Bed Hot Water Boiler with Water Cooled Square Cyclone

Design and operating of the maximum capacity 330MW CFB boiler in China

Updated design and operation experience of CFB boilers with energy saving process in China

A study of operation performance of circulating fluidized bed combustion boiler

From a CFB Reactor to a CFB Boiler – the Review of R&D Progress of CFB Coal Combustion Technology in China

Design And Development Of 850t/H Cfb Boiler With Energy Saving Technology

Research and Development on Circulating Fluidized Bed Combustion Technology in China

Design and Research on a 600MWe Supercritical Circulating Fluidized Bed Boiler

A 600MW Supercritical Circulating Fluidized Bed Boiler

Concept Design of a 200 MW CFB Boiler Based on Domestic Technology

A review on research and development of CFB combustion technology in China