Abstract:Anisole (methoxybenzene) is a widely used organic intermediate that can be synthesized via vapor-phase alkylation of phenol by methanol in the presence of a commercial NaX zeolite as a catalyst (SiO2:Al2O3 ratio of 2.6:3). The indigenously synthesized anisole is then separated from the multicomponent liquid reaction mixture, consisting of o-cresol, p-cresol and p-xylen, along with unreacted methanol and phenol. The separated anisole has substantial demand for applications in the chemical, pharmaceutical, plastics and pesticides industries. Separation of individual components from the reaction mixture requires identification of techniques that could be scaled up. Distillation is one of the most dependable techniques for the separation of multicomponent liquid mixtures. The novelty of the present study is the synthesis and separation of anisole along with individual components of methanol, phenol and o-cresol from its reaction mixture using a single distillation column under atmospheric and vacuum conditions, respectively. Through this process, the purity of the resulting methanol, anisole and phenol were found to be 99.99, 99.80 and 98.29% by simple distillation, whereas 91.0% pure o-cresol was separated by vacuum distillation due to its high boiling point. The experimental results were used to calculate the material, individual component and energy balances, whereas the PRO/II™ process simulation was performed to scale-up the process. On the other hand, anisole recovery from a synthetic multicomponent liquid mixture was also successfully conducted using solvent extraction. The overall observations found the integration of solvent extraction with distillation to be an effective, economical and dependable solution for the isolation of anisole and other important by-products.

The Study of Refining Solanesol by Molecular Distillation

Isolation of Solanesol from Discarded Tobacco Extracts

Characterization of Solanesol

Recovery Of Petroleum Ether From Solanesol Extracting Solution Through Vacuum Hydrophilic Membrane Distillation

Extraction and Purification of Solanesol from Tobacco(i). Extraction and Silica Gel Column Chromatography Separation of Solanesol

Condition optimization of simulated bio-oil molecular distillation via response surface method

Combination of Column Adsorption and Supercritical Fluid Extraction for Recovery of Dissolved Essential Oil from Distillation Waste Water of Yulania Liliiflora

Extraction of Solanesol from Tobacco with Supercritical Carbon Dioxide

Solid Phase Extraction of Solanesol

Solvent Optimization for Separating C4 by Extractive Distillation

Bioactivity of solanesol extracted from tobacco leaves with carbon dioxide–ethanol fluids

Synthesis of Molecularly Imprinted Polymer via Emulsion Polymerization for Application in Solanesol Separation

Based on Molecular Distillation Waste Organic Matter Reduction Processing Technology Research

High Vacuum Distillation for Low-Sulfur Biodiesel Production: from Laboratory to Large Scale

Molecular Distillation Separation Characteristic of Bio-Oil under Different Pressures

Study on the Reactive Extraction Process for Heptaldehyde–Undecane–Sodium Bisulfite Aqueous Solution System

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Separation of Anisole and Valuable Byproducts from Liquid Reaction Mixtures by Solvent Extraction and Multicomponent Distillation

Study of Methanol Extraction from Saturated Alkanes: Solvent Screening, Liquid–Liquid Equilibrium Measurement, and Thermodynamic Simulation

Influence of Salt Added to Solvent on Extractive Distillation