Abstract:with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene;The appearance of nitrogen oxide compounds during steam regeneration makes the regeneration temperature not too high.We derive the kinetics of steam regeneration and obtain an activation energy of about 177.8 kJ/mol during the steam regeneration process.Compared with the air combustion process, the steam regeneration process is more difficult to occur.Methanol-to-olefins (MTO) is industrially applied to produce ethylene and propylene using methanol converted from coal, synthetic gas, and biomass. SAPO-34 zeolites, as the most efficient catalyst in MTO process, are subject to the rapid deactivation due to coke deposition. Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process, compared to that by air regeneration. A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work. In doing so, we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure, acidity, residual coke properties and other structural parameters. The results show that with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene, which are normally considered as active hydrocarbon pool species in MTO reaction. However, when the regeneration temperature is too high, nitrogen oxides can be found in the residual coke. Meanwhile, as the regeneration temperature increases, the quantity of residual coke reduces and the acidity, BET surface area and pore structure of the regenerated samples can be better recovered, resulting in prolonging catalyst lifetime. We have further derived the kinetics of steam regeneration, and obtained an activation energy of about 177.8 kJ·mol−1. Compared that with air regeneration, the activation energy of steam regeneration is higher, indicating that the steam regeneration process is more difficult to occur.© 2020 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd.. All rights reserved.

COKING AND REGENERATED BEHAVIORS OF 5A MOLECULAR SIEVE IN SEPARATION OF REFORMATE RAFFINATE AND ITS MICROSTRUCTURE ANALYSIS

The Microstructure and Stability of a Ni-nano-CaO/Al2O3 Reforming Catalyst under Carbonation–calcination Cycling Conditions

Kinetic Study of Reactive Sorption-Enhanced Reforming of Coke Oven Gas for Hydrogen Production

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

Preparation of a Mesoporous Sorption Complex Catalyst and Its Evaluation in Reactive Sorption Enhanced Reforming

The ReSER-COG Process for Hydrogen Production on a Ni–CaO/Al2O3 Complex Catalyst

Reclamation Of Acid Pickling Waste: Preparation Of Nano Alpha-Fe2o3 And Its Catalytic Performance

Coking behavior of a submicron MFI catalyst during ethanol dehydration to ethylene in a pilot-scale fixed-bed reactor

Coking and decoking chemistry for resource utilization of polycyclic aromatic hydrocarbons (PAHs) and low-carbon process

Analysis of the Coke Precursor on Bio-oil Refining Catalyst and the Regeneration of the Deactivated Catalyst

Organic molecular gate in mordenite for deep removal of acetylene and carbon dioxide from ethylene under humid condition

Comparison of the regenerability of Co/sepiolite and Co/Al2O3 catalysts containing the spinel phase in simulated bio-oil steam reforming

Ni-Based Molecular Sieves Nanomaterials for Dry Methane Reforming: Role of Porous Structure and Active Sites Distribution on Hydrogen Production

A facile synthesized robust catalyst for efficient regeneration of biphasic solvent in CO 2 capture: characterization, performance, and mechanism

DEACTIVATION AND REGENERATION OF Pt/KL CATALYSTS FOR ALKANE AROMATIZATION

Deep removal of trace C 2 H 2 and CO 2 from C 2 H 4 by a customized potassium exchange mordenite

Efficient removal of the carbon deposits formed during the mixed methane reforming over Ni/Al2O3

Kinetics of steam regeneration of SAPO-34 zeolite catalyst in methanol-to-olefins (MTO) process

Experimental Study on Regeneration Characteristics of CO2-rich Blended Amine Solution Using Membrane Vacuum Regeneration Technology

Simultaneous Enhancement of Aromatic Products and Catalytic Lifetime for Catalytic Re-forming of Lignite Pyrolysis Volatiles over a Self-Assembled Hierarchical Core–Shell ZSM-5@Silicalite-1 Zeolite

Catalytic regeneration of amine-based absorbents for CO 2 capture: The effect of acidic sites and accessibility