Abstract:Coking of heavy oil plays a key role in in situ combustion, which is affected by conversion conditions. In this study, a fixed-bed reactor and a pressurized reactor were used to thermally transform a heavy oil sample from China into coke under different atmospheric conditions, heating rates, and pressures. Elemental composition and surface functional groups were studied by an elemental analyzer and diffuse reflectance Fourier transform infrared spectrometer, whereas oxidative activity and coke yield were characterized by a thermal gravimetric analyzer. Results showed that yields, characteristics, and oxidative activities differed between the cokes produced in inert and oxidizing atmospheres. Compared with an inert atmosphere, an oxidizing atmosphere presented lower coke formation temperature and higher yield. In comparison with inert atmosphere, the coke produced in oxidizing atmosphere contained more oxygen, thus increasing the amount of surface functional group, but its oxidative activity was poorer. In oxidizing atmosphere, conversion conditions influenced yield and characteristics of coke but exerted minimal influence on oxidative activity. Oxygen content increased, whereas coke yield decreased with increasing O-2 concentration. Oxygen content decreased, and yield increased initially and then decreased with increasing heating rate. Temperature of coke formation and oxidation decreased, while oxygen content and yield increased with increasing pressure. Through analysis of elements and functional groups of residues produced at different holding temperatures, our study confirmed that the following processes occurred during low-temperature oxidation: evaporation, oxygen-adding reaction, dehydrogenation and dealkylation, polymerization, decarbonylation, and mild oxidation of coke. Conversion conditions, including heating rate, oxygen concentration, and pressure, affected conversion rate of these processes, thus influencing coke characteristics.

COKING DEACTIVATION OF BINDERLESS 5A MOLECULAR SIEVES USED IN ADSORPTION FOR NORMAL HYDROCARBONS

Effect of Hydrothermal Treatment on Suppressing Coking of Zsm-5 Zeolite During Methanol-To-Propylene Reaction

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Catalytic Effect of Alkali Metals on the Gasification Dissolution Reaction and Deep Reaction Behavior of Metallurgical Cokes.

Investigation on coking deactivation behavior of molecular sieve catalysts

Effect of molecular structure on pyrolysis coking performances of hydrocarbons at different temperatures

Formation path and kinetics of caking components from modified lignite in subcritical H2O–CO system

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Adsorption of organic pollutants from coking wastewater by activated coke

Experimental Investigation on Catalyst Deactivation in Catalytic Cracking of Biomass Tar

Effect of binder composition on the preparation of formed coke with low-rank coal

Cu‐Fe/activated carbon catalyst for low‐temperature CO‐selective catalytic: Modification and denitration mechanism

Binder Selection to Modify Hydrocarbon Cracking Properties of Zeolite-Containing Composites.

In-situ study of the heating rate effects on covalent bonds conversion and pore/carbon microcrystal evolutions of coal molecule during coking

The further activation and functionalization of semicoke for CO2 capture from flue gases

Effect of Co Additive on Formation of Coke Deposits in Methane Dehydro-Aromatization over Mo/HZSM-5 Catalyst

Influence of Conversion Conditions on Heavy-Oil Coking During in Situ Combustion Process

The Effect of the Surface Properties of Activated Coke Derived from Coal on the Desulfurization Capability

Kinetic Models for the Coke Combustion on Deactivated ZSM-5/MOR Derived from N-Heptane Cracking

Synergetic Regulation of the Microstructure and Acidity of HZSM-5/MCM-41 for Efficient Catalytic Cracking of n-Decane

Effect of Binders on the Crushing Strength of Ferro-Coke