Abstract:Polyurethane (PU) foams are versatile materials with a broad application range. Their performance is driven by the stoichiometry of polymerization reaction, which has been investigated in several works. However, the analysis was often limited only to selected properties and compared samples differing in apparent density, significantly influencing their performance. In the bigger picture, there is still a lack of comprehensive studies dealing with the stoichiometry impact on PU foams' performance. Herein, flexible PU foams with a similar apparent density but differing in the isocyanate index (IIso) (from 0.80 to 1.20) were prepared. The stoichiometry–structure–performance relationships were investigated considering cellular and chemical structure, as well as the static and dynamic mechanical properties, thermal stability, thermal insulation, and acoustic performance. For IIso of 1.00, the biggest cell diameters of 274 μm were noted, which was 21–25% higher compared to 0.80 and 1.20 values. Increasing IIso reduced open cell content from 83.1 to 22.4%, which, combined with stiffening of structure (rise of modulus from 63 to 2787 kPa) resulting from crosslinking, limited the sound suppression ability around five times. On the other hand, it significantly strengthened the material, increasing tensile and compressive strength 4 and 13 times, respectively. Changes in the foams' performance were also induced by the glass transition temperature shift from 6.1 to 31.7 °C, resulting from a greater extent of urethane groups' generation and additional isocyanate reactions. Generally, the presented work provides important insights into preparing flexible PU foams and could be very useful for the future development of these materials.

Dynamic Mechanical Properties of Polyurethane Foams Prepared from Liquefied Corn Stover with PMDI

Mechanical Properties of Polyurethane Foams Prepared from Liquefied Corn Stover with PAPI.

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

Optimization of Reaction Conditions for Polyurethane Foam Synthesis with Liquefied Corn Stalk by Response Surface Methodology

The Effects of MDI Isomer on the Micro-Structure and Property of Polyurethane Elastomer

Comprehensive Investigation of Stoichiometry–Structure–Performance Relationships in Flexible Polyurethane Foams

Compressive Mechanical Behavior and Corresponding Failure Mechanism of Polymethacrylimide Foam Induced by Thermo-Mechanical Coupling

Study on the Pyrolytic Behaviors and Kinetics of Rigid Polyurethane Foams

Dynamic Mechanical and Ultrasonic Properties of Polyurea

Characterization and modeling of the uniaxial thermo-mechanical compressive behavior of polymethacrylimide (PMI) foam at different temperatures

Processing and properties of rigid polyurethane foams based on bio-oils from microwave-assisted pyrolysis of corn stover

Effects of PAPI Functionality and Isocyanate Index on the Properties of RPUF Blown by HFC-365mfc and Water

Experimental Study of the Thermal Conductivity of Polyurethane Foams

Pyrolysis Kinetics and Flammability Evaluation of Rigid Polyurethane with Different Isocyanate Content

Study on the Properties of Polyurethane–Urea Elastomers Prepared by TDI/MDI Mixture

Influence of Isocyanate Index on the Mechanical and Dielectric Properties of Polyurea

Dynamic mechanical analysis of sulfonated polyurethane ionomers

Reaction kinetics and properties of MDI base poly (urethane-isocyanurate) network polymers

Effects of Isocyanate Structure on the Properties of Polyurethane: Synthesis, Performance, and Self-Healing Characteristics

Dynamic Mechanical Properties and Constitutive Modeling of Polyurethane Microporous Elastomers

Mechanical Performance and Cushioning Energy Absorption Characteristics of Rigid Polyurethane Foam at Low and High Strain Rates