Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Transient Growth in a Two-Fluid Channel Flow under Normal Electric Field

Multi-bubble Motion Behavior of Electric Field Based on Phase Field Model

Effect of Intrachannel Ion Transport on Transient Characteristics of Nanochannels

Phase Field Simulation of Single Bubble Behavior under an Electric Field

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Transient Growth in Turbulent Particle-Laden Channel Flow

Numerical simulation of bubble dynamics in a micro-channel under a nonuniform electric field.

Numerical Simulation And Research On The Electroosmotic Flow In The Curve Channel

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

Optimal transient growth and transition to turbulence in the MHD pipe flow subject to a transverse magnetic field

From three-dimensional to quasi-two-dimensional: transient growth in magnetohydrodynamic duct flows

A nonlinear small-deformation theory for transient droplet electrohydrodynamics

Suppression of Electroconvective and Morphological Instabilities by an Imposed Cross Flow of the Electrolyte

On the nonlinear behaviour of the Rayleigh–Taylor instability with a tangential electric field for inviscid and perfect dielectric fluids

A transient solution for droplet deformation under electric fields

Dynamics of the Deformable Fluid Interface Interacting with an Approaching Solid under the Electrostatic Field

Effect of electric field on bubble dynamics in channel flow boiling using lattice Boltzmann method

Transient growth of stationary disturbances in a flat plate boundary layer

Electron cyclotron drift instability and anomalous transport: two-fluid moment theory and modeling

Transition Routes of Electrokinetic Flow in a Divergent Microchannel with Bending Walls