Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Effect of electric field on bubble dynamics in channel flow boiling using lattice Boltzmann method

Numerical analysis of single bubble dynamics and heat transfer in electric field-enhanced nucleate boiling

Electric field enhancement of pool boiling of dielectric fluids on pillar-structured surfaces: A lattice Boltzmann study

Visualization of A Single Boiling Bubble in A Dc Electric Field

Enhanced boiling heat transfer using conducting-insulating microcavity surfaces in an electric field: A lattice Boltzmann study

Field trap effect on pool boiling enhancement in a non-uniform electric field: A numerical study

Effect of pin electrodes on flow boiling heat transfer and bubble dynamic behaviors in vertical minichannels

A mesoscopic numerical method for enhanced pool boiling heat transfer on conical surfaces under an electric field

Multi-bubble Motion Behavior of Electric Field Based on Phase Field Model

Effects of electric field on flow boiling heat transfer characteristics in a microchannel heat sink with various orientations

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

A numerical investigation of electrohydrodynamic (EHD) effects on bubble deformation under pseudo-nucleate boiling conditions

Lattice Boltzmann mesoscopic modeling of flow boiling heat transfer processes in a microchannel

Numerical Simulations of Single Bubble Behavior in DC Electric Fields

Investigation of bubble dynamics and boiling heat transfer characteristics under vertically heating walls via lattice Boltzmann method

Numerical Study of Patterns and Influencing Factors on Flow Boiling in Vertical Tubes by Thermal LBM Simulation

Experimental and LBM Simulation Study on the Effect of Bubbles Merging on Flow Boiling

Effect of Contact Angle on Flow Boiling in Vertical Ducts: A Pseudo-Potential MRT-thermal LB Coupled Study

Flow boiling heat transfer enhancement in vertical minichannel heat sink with non-uniform microcavity arrays under electric field

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Single Bubble Behavior in Direct Current Electric Field