Abstract:In order to promote the research and development on evaluating the seismic performance of structures, China State Construction Engineering Corporation (CSCEC) planned to construct a large-scale loading testing facility, the Multi-Function Testing System (MFTS). This facility can perform full-scale, real-time, 6-degree-of-freedom static and dynamic testing of rubber bearings and many types of structural components including long columns, shear walls and cross shape joints. The basic performances of the MFTS are a clearance of 9.1 m x 6.6 m x 10 m for specimen installation, maximum x-directional displacement 1500 mm, maximum y-directional velocity 1570 mm/s and maximum z-directional compressive load 108 MN. The system configuration and performance specifications of the MFTS are presented in this paper. The inverse kinematics model and the nonlinear model of the hydraulic servosystem of the MFTS are built. A modified feedback forward kinematics algorithm is developed for real-time control of the MFTS. Internal force characteristics of the loading system are analyzed. The internal force control method based on real-time solution of basis of internal force space is proposed for the system with large motion ranges. The motion controller combining position control loop and internal force control loop is developed. To meet the requirement of simultaneously imposing vertical compressive load and horizontal displacement, a mixed load and displacement controller is designed, where a direct force control loop is used to improve the response speed of the force control and reduce spatial dynamic coupling effects. Finally, a dynamic bearing testing is performed. The test results demonstrate that the system using the proposed controller has good abilities on position tracking, force balance, and load following.

Study of digital control system for seismic simulation test rig

Research of earthquake simulation control of multi-movement parameters replication

Research On Three-Variable Control Technology Of Seismic Simulating Shaking Tables

Control strategy in earthquake simulation test based on elastic payload

Earthquake simulation control of a specimen in elastoplastic stage

Research of Multi-Movement Parameters Iterative Control of Multi-Degrees-Of-Freedom Earthquake Simulation

A Novel Three-Parameter Tuning Method For Seismic Simulation Shaking Table

The Control Strategy Study for Hydraulic Shaking Table

Control Designs for Multi-Exciter Power Spectral Density Replication Vibration Tests

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

Aseismic Tests of NEBS GR-63-CORE and Its Control Strategy

Development of remote pseudo-dynamic test platform

Development of a Remotely Collaborative Pseudo-dynamic Testing Platform for Bridge Structures

NETWORKED STRUCTURAL LABORATORIES:DEVELOPMENT AND APPLICATION OF REMOTE PSEUDO-DYNAMIC TESTING PLATFORMS FOR BRIDGE STRUCTURES

Influence and compensation of connection characteristics on shaking table control performance

Development of a Versatile Hybrid Testing System for Seismic Experimentation

Modeling Analysis of Seismic Wave Generation and Control Based on Twin Rotary Valve

Modeling and Control of the CSCEC Multi-Function Testing System

Research on PSD Replication for Multiaxial Hydraulic Vibration Test System Based on FXLMS Algorithms

Study On Method Of Dynamic Simulation Using Adaptive Control

Design of Main Control Software in High Precision Earthquake Acquisition System