Abstract:For the research on real-time accurate testing technology for the explosion point spatial coordinate of munitions, its currently commonly used methods such as acoustic–electric detection or high-speed imaging are limited by the field conditions, response rate, cost, and other factors. In this paper, a method of spatial coordinate testing for the explosion point based on a 2D PSD (position-sensitive detector) intersection is proposed, which has the advantages of a faster response, better real-time performance, and a lower cost. Firstly, a mathematical model of the spatial coordinate testing system was constructed, and an error propagation model for structural parameters was developed. The influence of the position of the optical axes' intersection as well as the azimuth angle and pitch angle on the test accuracy of the system was simulated and analyzed, thus obtaining the distribution and variation trend of the overall error propagation coefficient of the system. Finally, experiments were designed to obtain the test error of the system for validation. The results show that the system test accuracy is high when the azimuth angle is 20°–50°, the overall error propagation coefficient does not exceed 48.80, and the average test error is 56.17 mm. When the pitch angle is −2.5°–2.5°, the system has a higher test accuracy, with the overall error propagation coefficient not exceeding 44.82, and the average test error is 41.87 mm. The test accuracy of the system is higher when the position of the optical axes' intersection is chosen to make sure that explosion points fall in the region of the negative half-axis of the Zw-axis of the world coordinate system, with an overall error propagation coefficient of less than 44.78 and an average test error of 73.38 mm. It is shown that a reasonable selection of system structure parameters can significantly improve the system test accuracy and optimize the system deployment mode under the long-distance field conditions so as to improve the deployment efficiency.

Principle and analysis of high altitude projectile location measurement using multi-screen target method

Research on Endpoint Detection Algorithm in High Altitude Explosion Point Location Technology

Accuracy Analysis for Digital Boresighting of Aircraft Gun

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Three-dimensional coordinates test method with uncertain projectile proximity explosion position based on dynamic seven photoelectric detection screen

Error Analysis and Optimization of Structural Parameters of Spatial Coordinate Testing System Based on Position-Sensitive Detector

Light Curtain Target Point Coordinate Measuring Method

Linear CCD and image-subtraction analysis to detect projectile motion in real time

Position And Attitude Measurement Of Moving Target Using Laser Tracking System With Multiple Measuring Stations

Mathematical model of laser tracking system for measuring spatial position and altitude of moving targets

Measurement model and accuracy analysis of parabolic ballistic projectile flight parameters based on random matrix

Design and Detection Calculation Model of Laser Photoelectric Detection Target With Array Lens and High-Power Line Laser

Calibration Method of Projectile-velocity Measurement System

Single-event-camera-based 3D Trajectory Measurement Method for High-Speed Moving Targets

An Improved C2 Algorithm for Radar Low-Altitude Measurement

Flight parameter calculation method of multi-projectiles using temporal and spatial information constraint

Multitargets Orientation Technique Based on Reflection Characteristic Analysis Using an Inverse Diffraction Parabolic Equation

New Approach for Ground Target Location with Precision Analysis and Simulation

Fragment Perforation Spatial Localization Measurement Method and Calculation Analysis by Using Photogrammetry Technology

Sea Fall Point Measurement Method Based on Cone Angle Intersection

A line laser detection screen design and projectile echo power calculation in detection screen area