Abstract:Abstract Defibrillation is accomplished by the passage of sufficient current through the heart to terminate ventricular fibrillation (VF). Although current-based defibrillation has been shown to be superior to energy-based defibrillation with monophasic waveforms, defibrillators with biphasic waveforms still use energy as a therapeutic dosage. In the present study, we propose a novel framework of current-based, biphasic defibrillation grounded in transthoracic impedance (TTI) measurements: adjusting the charging voltage to deliver the desired current based on the energy setting and measured pre-shock TTI; and adjusting the pulse duration to deliver the desired energy based on the output current and intra-shock TTI. The defibrillation efficacy of current-based defibrillation was compared with that of energy-based defibrillation in a simulated high impedance rabbit model of VF. Cardiac arrest was induced by pacing the right ventricle for 60 s in 24 New Zealand rabbits (10 males). A defibrillatory shock was applied with one of the two defibrillators after 90 s of VF. The defibrillation thresholds (DFTs) at different pathway impedances were determined utilizing a 5-step up-and-down protocol. The procedure was repeated after an interval of 5 min. A total of 30 fibrillation events and defibrillation attempts were investigated for each animal. The pulse duration was significantly shorter, and the waveform tilt was much lower for the current-based defibrillator. Compared with energy-based defibrillation, the energy, peak voltage, and peak current DFT were markedly lower when the pathway impedance was > 120 Ω, but there were no differences in DFT values when the pathway impedance was between 80 and 120 Ω for current-based defibrillation. Additionally, peak voltage and the peak current DFT were significantly lower for current-based defibrillation when the pathway impedance was < 80 Ω. In sum, a framework of adjusting the charging voltage and shock duration to deliver constant energy for low impedance and constant current for high impedance via pre-shock and intra-shock impedance measurements, greatly improved the defibrillation efficacy of high impedance by lowering the energy DFT.

Design of a defibrillator used for low energy defibrillation

The Investigation Of Low Energy Defibrillation Methods

Decreasing the Defibrillation Energy by Optimizing the Pulse Duration of Electrical Shock

Development of Electropulsing Treatment Device Based on Capacitor Energy Storage and Discharge

The relationship of shock parameters and defibrillation efficiency

[The Design of the External Defibrillator Using the Truncated Exponential Biphasic Waveform].

Toward Miniaturization of Defibrillators: Design of a Defibrillation Charge/Discharge Circuit

Development of cardioverter-defibrillator for surgical

Low-energy Defibrillation Research Using a Rabbit Ventricular Model: Optimizing the Potential Gradient Distribution Using Multiple Epicardial Electrodes.

A framework of current based defibrillation improves defibrillation efficacy of biphasic truncated exponential waveform in rabbits

Study on Accurately Controlling Discharge Energy Method Used in External Defibrillator

A special cardioverter-defibrillator in surgery

Ultra-low-energy defibrillation through adjoint optimization

Does the successful ventricular defibrillation decide by energy or charge?

Study on energy compensation in automated external defibrillator

Model Reseach of Effects of Defibrillation Waveform on Action Potential Duration.

Electrical Synchrony Optimization for Left Bundle Branch Area Pacing in Patients with Bradycardia and Heart Failure.

Low-energy Defibrillation with Multi-Electrodes Stimulation: A Simulation Study.

Adaptive Electric Shocks Control and Elimination of Spiral Waves Using Dynamic Learning Based Techniques

Energy calibration technique of defibrillator analyzer

Improved Fly-back Charging Circuit for External Defibrillator