Abstract:With the increasing attention on oceanography, more effective exploration technology has been of great interests in the community of ocean engineering. Side-scan sonar is a popular imaging equipment for seabed topography; however, it is commonly used under 4 knots, which does not meet the actual demand of the modern oceanographic research. This paper proposes a high-speed side-scan sonar imaging scheme based on multi-beam forming technology. In this scheme, the digital signal processing system can adjust the maximum response direction of the receiving array by introducing appropriate phase shift or time delay to the output, so as to increase the scanning range and then improve operation efficiency. In order to verify the feasibility of this imaging algorithm, an ocean environment model is constructed, which simulates the acoustic propagation theory, the principle of seabed acoustic backscattering and the acoustic signal modulation method. After analyzing the acoustic characteristics of uniform linear array, an underwater acoustic transducer with multiple receiving subarrays is designed. In the process of simulated navigation, the receiving subarrays will generate the electrical signal containing seabed acoustic information. Based on the simulation signal, the parameters of the digital filter in the actual system can be determined in advance, which provides convenience for later processing. The time delay matrix of each receiving channel based on dynamic focusing beamforming method can be verified by imaging the seabed model. The processed acoustic data are combined with GPS information and heading angle to generate seabed scanning image in the host computer system. This paper mainly presents the imaging algorithm of multi-beam side-scan sonar digital signal processing system.

An Extraction Method of Seabed Reflection Loss Based on Towed Tilted Line Array

Experimental Demonstration Of Acoustic Inversion Using An Auv Carrying Source

Experimental Study on Measuring Reflection Coefficients at Oblique Incidence Using the Inverse Filter

An Imaging Algorithm for High-speed Side-scan Sonar Based on Multi-beam Forming Technology

A robust array geometry inversion method for a deep-towed multichannel seismic system with a complex seafloor

A Linear Near-Field Interference Cancellation Method Based on Deconvolved Conventional Beamformer Using Fresnel Approximation

Reflection Waveform Inversion Based on Full-Band Seismic Data Reconstruction for Salt Structure Inversion

A Real-Time 3-D Underwater Acoustical Imaging System

Inversion of Ocean Environmental Variations Via Time-Reversal Acoustics

Data-based Depth Estimation of an Incoming Autonomous Underwater Vehicle.

A Method For The Towed Line Array Sonar'S Port-Side/Starboard-Side Discrimination

Accurate Source-Receiver Positioning Method for a High-Resolution Deep-Towed Multichannel Seismic Exploration System

Moving Source Depth Estimation in Deep Ocean Direct Arrival Zone with a Horizontal Line Array.

Inversion of Range-Dependent Ocean Environmental Parameters Using Radiation Noises of an Autonomous Underwater Vehicle

Research on the broadband source localization of a vector hydrophone vertical line array in the deep sea

Passive Acoustic Inversion with Virtual Head Waves

A Nonlinear Data-Driven Towed Array Shape Estimation Method Using Passive Underwater Acoustic Data

Towed Array Shape Estimation Using Acoustic and Heading Data

Array shape estimation based on tug vehicle noise for towed linear array sonar during turning

Target Depth Estimation by Frequency Interference Matching for a Deep Vertical Array

Offshore Towed Hydrophone Linear Array: Principle, Application, and Data Acquisition Results