Abstract:The BOUT++ edge plasma transport code is applied to study the effects of neutral recycling, drifts and heating scheme on edge plasma profiles and the divertor heat flux width of two discharges of the experimental advanced superconducting tokamak (EAST) steady-state H-mode plasmas heated by low hybrid wave (LHW) and neutral beam (NB), respectively. Neutral recycling seems to have played an important role in the plasma density profile. The edge plasma density drops dramatically for the case w/o neutral recycling, while it can be sustained for the case w/ neutral recycling. Drifts are found to have significant influences on edge plasma profiles. Both the amplitude and width of the divertor heat flux are found to have increased a lot due to drifts. The simulated heat flux width w/ drifts for the two discharges shows reasonable agreement with the experiments. However, the width from the simulation and experiment for the LHW heated discharge is much larger than that of the NB heated discharge. Comparison with Goldston’s drift-based model and more detailed analysis on the heat flux contributions from drifts versus turbulence show that drifts are the dominant factor in edge plasma transport for both LHW and NB heated discharges, while turbulence may have played a more important role in determining the heat flux width in LHW heated discharges than that in NB heated discharges. This may account for the larger heat flux width in the LHW heated discharge. The magnetic topology and the equilibrium change by the LHW power may also be a potential reason for the larger heat flux width in the LHW heated discharges, which still needs more evidence and studies to support it. Additional SOLPS simulation w/o drifts for the two discharges show reasonable agreement with the counterpart from the BOUT++ simulation, suggesting the two are both suitable codes for EAST edge plasma simulation.

Transport Modelling for East with Lhrf and Nbi

Transport Modeling of L- and H-Mode Discharges with Lhcd on East

Particle Transport Investigation in HL-2 A Using ECRH and SMBI

Lower Hybrid Current Drive Simulation on EAST

HL‐2A's ELM cycle simulations by integrating BOUT++'s drift MHD and transport code

An Experimental Investigation of Blob Behaviors in Lower Hybrid Wave Dominant Heating Scenarios on EAST

Investigation of Lower Hybrid Current Drive During H-mode in EAST Tokamak

Numerical Simulation of Lower Hybrid Current Drive on EAST Tokamak

Dynamics of Electron Internal Transport Barrier Formation at the H–L Transition on EAST

Simulation of Divertor Heat Flux Width on EAST by BOUT++ Transport Code

Lower Hybrid Current Drive Experiments in Support of High Confinement Long Pulse Operation in EAST

Validating the Energy Transport Modeling of the DIII-D and EAST Ramp Up Experiments Using TSC

Simulations of Neutral Beam Injection and Ion Cyclotron Resonance Heating Synergy in High Power EAST Scenarios

Electron cyclotron current drive under neutral beam injection on HL-2M

Effort of Lower Hybrid Current Drive Experiments Toward to H-mode in EAST

Combining Effects Between LHW and IBW Injections on EAST

Investigation of Energy Transport in DIII-D High-βPEAST-demonstration Discharges with the TGLF Turbulent and NEO Neoclassical Transport Models

Validation of theory-based integrated modeling and new insights for a high-performance steady-state scenario with only RF heating on EAST

First Three-Dimensional Edge Plasma Transport Simulations with Magnetic Perturbations Induced by Lower Hybrid Waves on EAST

Key Effects on the Confinement Improvement of the ASDEX Upgrade Hybrid Scenario

Predictive Simulations of Operation Scenarios for East with Metis Code