Abstract:The pseudo-first-order phase transition in 0.94Bi(0.5)Na(0.5)TiO(3)-0.06BaTiO(3) ceramics leads to a sharp increase in temperature change (AT) in the vicinity of the ferroelectric-to-relaxor transition temperature T-FR (similar to 100 degrees C) [Appl. Phys. Lett. 110 (2017) 182904]. In this study, we add the 0,78Bi(0.5)Na(0.5)TiO(3)-0.06BaTiO(3-)0.16(Sr0.7Bi0.2)TiO3 relaxor phase to the 0.94Bi(0.5)Na(0.5)TiO(3)-0.06BaTiO(3) ferroelectric matrix to tune its electrocaloric effect. The results show that the addition of the relaxor phase plays a vital role in phase and localstructure evolution. A transition occurs between the ferroelectric and ergodic relaxor phases when the mass fraction of the latter increases to 30% (x = 0.3), as verified by X-ray diffraction analysis, Raman spectroscopy, and polarization-electric field (P-E) hysteresis loops. Furthermore, addition of the relaxor phase reduces the TFR from 76 degrees C at x = 0.1-55 degrees C at x = 0.2; however, this transition disappears at x = 0.3 and 0.4 composite. In-situ piezo-force microscopy (PFM) images illustrate that domains can be written into x = 0.1 and 0.2 ceramics with a valley in the piezoresponse curves. Increasing the temperature agitates the domain arrangement and decreases the contrast for PFM images; this indicates a gradual phase transition in the composite. The temperature corresponding to maximum Delta T exhibits a downward shift (0.58 K at 80 degrees C for x = 0.1 and 0.5 K at 65 degrees C for x = 0.2), while the temperature-Delta T curves are flat when x = 0.3 and 0.4. Moreover, the maximum Delta T shows a decrease with an increase in the relaxor phase content; this is believed to be related to a decrease in the latent heat due to a pseudo-first-order to second-order transition. Thus, we suggest that the incorporation of a relaxor phase into ferroelectric matrices is an effective technique to tune their electrocaloric effect and improve the thermal stability of ceramic composites.

Ferroelectric-Relaxor Behavior of 0.8Batio3-0.2(Na1/4bi3/4)(mg1/4ti3/4)o3 Ceramic

Low Temperature Dielectric Relaxation in Complex Perovskite Bati0.8(Ni0.5nb0.5)(0.2)O-3 Ceramics

Dielectric Properties and Tunability of (sr,bi)tio3 with MgO Additive

Ferroelectric to Relaxor Transition in BaTiO3-Bi(Zn2/3Nb1/3)O-3 Ceramics

Enhanced Relaxor Behavior and Thermal- and Frequency-Insensitive Strain of (na0.5bi0.5)0.93ba0.07ti1 − X(mn1/3nb2/3)xo3 Ceramics

Dielectric Relaxor Evolution and Frequency‐Insensitive Giant Strains in (bi0.5na0.5)tio3‐modified Bi(Mg0.5Ti0.5)O3–PbTiO3 Ferroelectric Ceramics

Relaxor Ferroelectric Characteristics And Temperature-Dependent Domain Structure In A (110)-Cut (Pbmg1/3nb2/3o3)(0.75)(Pbtio3)(0.25) Single Crystal

Dielectric Relaxor and Ferroelectric Relaxor: Bi-Doped Paraelectric Srtio3

Dynamic Behavior of Polar Nanoregions in Re-Entrant Relaxor 0.6Bi(mg1/2ti1/2)o3-0.4Pbtio3

Dielectric Relaxation Behavior of Ceramics in the Pb(Zn 1/3 Nb 2/3 )O 3 -Batio 3 -Pbtio 3 System

Temperature-Dependent Electrical Properties Of 0.94bi(0.5)Na(0.5)Tio(3)-0.06batio(3) Ceramics

Temperature-Dependent Electrical Properties of 0.94Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-0.06BaTiO<sub>3</sub>Ceramics

Re-Entrant Relaxor Behavior in Batio3-Bi(Zn2/3nb1/3)O-3 Ceramics

Relaxor-like behaviors in Na1/2Bi1/2Cu3Ti4O12 ceramics

Dielectric relaxation behavior of ceramics in the Pb(Zn1/3Nb2/3)O-3-BaTiO3-PbTiO3 system

Dielectric, ferroelectric, piezoelectric properties, and conduction behavior of (Bi0.5Na0.5)0.94+xBa0.06TiO3 ceramics

Structure-property Relationships in the Lead-Free Piezoceramic System K0.5Bi0.5TiO3 - BiMg0.5Ti0.5O3

The Dielectric Relaxation Behavior of (na0.82k0.18)0.5bi0.5tio3 Ferroelectric Thin Film

Tuning the Electrocaloric Effect in 0.94Bi0.5na0.5tio3-0.06Batio3 Ceramics by Relaxor Phase Blending

Dielectric Relaxations in Multiferroic La2ti2o7 Ceramics

Electrocaloric effect in relaxor ferroelectric Ba(Ti1-xYx)O3-x/2 ceramics over a broad temperature range