Abstract:Cables that have been in service for over 20 years in Shanghai, a city with abundant surface water, failed more frequently and induced different cable accidents. This necessitates researches on the insulation aging state of cables working in special circumstances. We performed multi-parameter tests with samples from about 300 cable lines in Shanghai. The tests included water tree investigation, tensile test, dielectric spectroscopy test, thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), and electrical aging test. Then, we carried out regression analysis between every two test parameters. Moreover, through two-sample t-Test and analysis of variance (ANOVA) of each test parameter, we analyzed the influences of cable-laying method and sampling section on the degradation of cable insulation respectively. Furthermore, the test parameters which have strong correlation in the regression analysis or significant differences in the t-Test or ANOVA analysis were determined to be the ones identifying the XLPE cable insulation aging state. The thresholds for distinguishing insulation aging states had been also obtained with the aid of statistical analysis and fuzzy clustering. Based on the fuzzy inference, we established a cable insulation aging diagnosis model using the intensity transfer method. The results of regression analysis indicate that the degradation of cable insulation accelerates as the degree of in-service aging increases. This validates the rule that the increase of microscopic imperfections in solid material enhances the dielectric breakdown strength. The results of the two-sample t-Test and the ANOVA indicate that the direct-buried cables are more sensitive to insulation degradation than duct cables. This confirms that the tensile strength and breakdown strength are reliable functional parameters in cable insulation evaluations. A case study further indicates that the proposed diagnosis model based on the fuzzy inference can reflect the comprehensive aging state of cable insulation well, and that the cable service time has no correlation with the insulation aging state.

The Condition Assessment System Of Xlpe Cables Using The Isothermal Relaxation Current Technique

Research on Aging Parameters of XLPE Cable Based on Isothermal Relaxation Current

The Method of Lifetime Evaluation on 10kV XLPE Cables by Isothermal Relaxation Current

A Modified Measurement Technique Based on the Depolarization Current Used for Power Cable

Numerical Analysis of Thermo-Electric Field for AC XLPE Cables with Different Service Times in DC Operation Based on Conduction Current Measurement

Effect of Tensile Stress on Insulation Properties of 500 Kv EHVAC XLPE Cable under Multi-Field Ageing

Measurement and Analysis on Strains in XLPE Insulation of Power Cables

Ageing Condition Assessment of XLPE Cable Insulation Based on tanδ at 0.1 Hz

Studies of the Polarization/depolarization Current Characteristics of XLPE Cable

Evaluation Analysis of XLPE Cable's Electrical Condition

A New Method Of Aging Assessment For Xlpe Cable Insulation Based On Dielectric Response

Insulation Ageing Diagnosis of Xlpe Power Cables under Service Conditions

Evaluation Analysis of 10 kV XLPE Cable's Operation Condition

Insulation Status Diagnosis of Xlpe Cable Based on Polarization and Depolarization Current (Pdc)

Assessing Aging Status and Type of XLPE Cable Insulation with A Graphic Approach Based on PDC Measurement

Study on Diagnostic Method of Aging 10kv XLPE Cable

Study on Insulation Performance of Thermal Aging XLPE Cables by Direct Current Integrated Charge Technique

Evaluation of Non-Uniform Thermal Aging of XLPE Cable Based on Modified Debye Model

Insulation diagnosis of service aged XLPE power cables using statistical analysis and fuzzy inference

Ageing Condition Assessment of DC Cable XLPE Insulation by Tan Δ Measurement at 0.1 Hz Voltage

A New Method of Estimating the Inverse Power Law Ageing Parameter of XLPE Based on Step-Stress Tests