Optimum design of a low fabrication error sensitivity electro-optic switch using triple-section reversed electrodes

Chuantao Zheng,Chunsheng Ma,Xin Yan,Hongqi Chen,Daming Zhang

DOI: https://doi.org/10.3788/AOS200929s2.0111

2009-01-01

Abstract:To effectively decrease the effect of the fabrication error on the crosstalk, a polymer directional coupler electro-optic switch with triple-section reversed electrodes was optimized and designed by using the point matching method, coupled mode theory and electro-optic modulation theory. Considering the influences of the waveguides with/without electrode upon in the coupling region, novel expressions including the power transfer matrix, output powers and propagation powers were obtained. Characteristics were analyzed, involving the state voltages, switching voltage, output powers, propagation powers, insertion loss, crosstalk, output spectrum and fabrication error. Simulation results show that by slightly adjusting the two state voltages, the crosstalk as low as -50 and -60 dB can be achieved for the two output ports, respectively, when the fabrication error of the waveguide length exists from -500 to 500 μm under the central operation wavelength. The proposed analytical theory and design technique are proved to be sufficiently accurate by the comparisons with the simulation results from the beam propagation method (BPM).