Abstract:In this study, the influence of a direct-current electric field under high pressures on the burning rate and combustion efficiency of a propellant were investigated, and the results were verified by solid rocket motor (SRM) experiments. The effects of the electric field on combustion of propellant were studied at various ambient pressures (1–7 MPa) and different applied voltages (−5 to 5 kV). It was found that an applied electric field had a catalytic effect on the propellant combustion at different ambient pressures. When applying an electric field at 1 MPa, as the applied voltage increased from 0 to 5 kV, the burning rate and combustion efficiency increased from 3.390 to 3.884 mm/s, combustion efficiency increased from 95.13 % to 97.45 %, respectively. However, a high ambient pressure weakened the burning rate catalytic influence of the applied electric field. Hot firing of the SRM verified that the electric field could increase the thrust and the specific impulse of the motor by 6.1N(25.3 %) and 7.5s(3.3 %), respectively. Additionally, the forward electric field had a greater catalytic effect on the propellant combustion than the reverse electric field. The high-strength applied electric field was found to catalyze particle charge acceleration, the rupture of aluminum droplets, and ion excitation. By utilizing this phenomenon, the combustion, and energetic properties of solid rocket motors (SRMs) can be finely adjusted using an electric field. The results of this research contribute to the advancement of a more effective approach for thrust control in SRMs. Novelty and significance This study investigates the effects of an electric field on aluminum droplets and combustion flames in propellants. An experimental setup was designed to regulate the combustion of solid propellants using an electric field, and this setup was tested in a solid rocket motor. A specialized electric field experiment apparatus and an electric field-regulated motor were designed to validate the influence of the electric field on propellant combustion. The results show that the electric field increased the propellant's combustion rate by up to 8.8 % and improved combustion efficiency by up to 1.81 %. An electric field of 1.5 kV increased the motor's thrust by 6.1 N and the specific impulse by 7.5 s. This research elucidates the impact of electric field strength and direction on propellant combustion characteristics and analyzes the underlying mechanisms from the perspective of combustion flames and aluminum particle behavior. The study provides a new approach for energy management in solid rocket motors.

Preliminary experimental investigation on small-thrust long-time working solid rocket motors

Research on the Safety of Long Term Storage Solid Rocket Motor with Debonded Layer

Tuning the Ballistic Performance of a Single-Burning-Rate Grain Solid Rocket Motor via New Discontinuous Embedded Metal Wires

Experimental Research on Electron Density in Solid-Rocket Motor Plume

Solid rocket motor design employing an efficient performance matching approach

Numerical Modeling and Studies of Ignition Transients in End-Burning-Grain Solid Rocket Motors

High efficient solid composite propellant combustion by electric control

Numerical investigation on thrust gain mechanism of helium injected solid–gas hybrid rocket motor

Numerical simulation of the effect of multiple factors on the ignition process of a solid rocket motor

Experimental and numerical study on RBCC engines performance in simultaneous and combustion cycle

Comparison Of Solid Rocket Motor Thrust Modulation Technique

Experimental Investigation of N2O-PMMA Lab-Scale Hybrid Rocket Motor

Research Progress of Solid Propellant Micro-Thruster

Preliminary experimental study on combustion characteristics in a solid rocket motor nozzle based on the TDLAS system

Ablation Characteristics Research in Solid Rocket Motor's Combustion Chamber Produced by 3D Printing

Experimental and numerical study on slag deposition in solid rocket motor

Long-Duration Dynamic Numerical Simulation of Combustion and Flow in Hybrid Rocket Motors Considering Nozzle Erosion

Research on the Design and Bidirectional Work Process of Metal Diaphragms in Small Double-Pulse Solid Rocket Motors

Modeling and Analysis of Triggering Pulse to Thermoacoustic Instability in an End-Burning-grain Model Solid Rocket Motor

Numerical analysis on combustion instabilities in end-burning-grain solid rocket motors utilizing pressure-coupled response functions

Rapid Optimization Method of Solid Rocket Motor Propellant with Structural Strength