Abstract:As the fatigue problem of orthotropic steel plates becomes increasingly severe in medium- and long-span bridges, structural health monitoring of the plates that could identify cracks timely is in great demand. Considering that orthotropic steel plates are of multiple structural elements and complex geometries, it is challenging to locate the cracks accurately. To this end, a novel acoustic emission (AE) source location method based on empirical wavelet transform and long short-term memory neural network was developed for crack monitoring of orthotropic steel plates. Empirical wavelet transform adaptively decomposed prominent components contained in the raw AE signal, of which the one with distinct dispersive modes was selected as the characteristic component to more precisely determine the arrival time through Akiake information criteria. The long short-term memory model established a more exact relationship between the arrival time differences of AE signals at multiple sensors and the source coordinates. With the help of empirical wavelet transform and long short-term memory model, it significantly eliminated the influence of dispersion, reflection, scattering, multiple propagation paths and noise, and thus guaranteed higher crack location accuracy. Through field experiment on a long-span suspension bridge, where cracks were simulated by artificial AE sources, a comprehensive comparison was carried out among traditional time-of-arrival method, delta-T mapping method, improved delta-T mapping method based on Akiake information criteria and Gaussian process, a counterpart of the proposed method based on empirical wavelet transform and Gaussian process, as well as the proposed method based on empirical wavelet transform and long short-term memory neural network. The location errors and their variations of the proposed method were found far less than those of the other existing methods. The location accuracy could be further improved by increasing the grid resolution of pencil lead break pre-tests. The results demonstrated the feasibility and superiority of the proposed crack location method for field applications on large-scale complex structures like orthotropic steel plates.

Estimation of Crack Parameters Through Wfem and Neural Network

Finite Element Analysis of Laser-Generated Rayleigh Wave for Sizing Subsurface Crack in Frequency Domain

Quantitative Evaluation of Subsurface Cracks with Laser-Generated Surface Wave Based on Back Propagation Neural Network

A crack identification scheme based on neural network surrogate model and XFEM

Lamb Wave Characterization of Crack Depth in Aluminum Plates Using Artificial Neural Networks

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

Spatial distribution of mechanical parameters along a fracture interface

Numerical Simulations of Arbitrary Evolving Cracks in Geotechnical Structures Using the Nonlinear Augmented Finite Element Method (N-AFEM)

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Identification of crack location and depth in rotating machinery based on artificial neural network

A novel surrogate-based crack identification method for cantilever beam based on the change of natural frequencies

Improved back propagation neural network based on the enrichment for the crack propagation

Analysis of flexural wave propagation through beams with a breathing crack using wavelet spectral finite element method

Crack Propagation Detection Method in the Structural Fatigue Process

Enriched physics-informed neural networks for in-plane crack problems: Theory and MATLAB codes

Crack characterization in ferromagnetic steels by pulsed eddy current technique based on GA-BP neural network model

Probabilistic Model Updating for Sizing of Hole-Edge Crack Using Fiber Bragg Grating Sensors and the High-Order Extended Finite Element Method

Comparative Study on Prediction Effects of Short Fatigue Crack Propagation Rate by Two Different Calculation Methods

Identification of Crack in Functionally Graded Material Beams Using the P-Version of Finite Element Method

A novel acoustic emission source location method for crack monitoring of orthotropic steel plates

Estimation of Fracture Properties From Azimuthal Seismic Data Using Convolution Neural Network