Experimental study of strain rate effect on dynamic flexural-tensile properties of wet sieving concrete in Xiaowan arch dam

苏盛,陈厚群,周继凯,吴胜兴

2009-01-01

Abstract:The effect of strain rate on flexural-tensile properties of wet sieving concrete is experimentally tested for the Xiaowan arch dam. The third point loading method with MTS322 is used to test a simply-supported beam with twelve specimens of size 150 mm×150 mm×550 mm and four loading strain rates 1×10 -6 s -1, 1×10 -5 s -1, 0.9×10 -4 s -1 and 0.9×10 -3 s -1. The main results are as follow. First, when the strain rate increases, the flexural-tensile strength, the flexural-tensile Young's modulus and the flexural-tensile peak secant modulus of wet sieving concrete all increase, while in contrast the ultimate flexural-tensile strain decreases, and the flexural-tensile Poisson ratios remain unchanged. Second, relative to the strain rate of 1×10 -5 s -1, the flexural-tensile strength under strain rates of 1×10 -5 s -1, 0.9×10 -4 s -1 and 0.9×10 -3 s -1 increases by 16%, 33% and 38%, respectively, the flexural-tensile Young's modulus increases by 2%, 5% and 13%, respectively, and the flexural-tensile peak secant modulus increases by 7%, 24% and 33%, respectively, while the ultimate flexural-tensile strain decreases by 1%, 3% and 5%, respectively. Third, based on the test results, calculation formulas are established for the static-dynamic flexural-tensile strength, the flexural-tensile Young's modulus, the flexural-tensile peak secant modulus and the ultimate strain of wet sieving concrete. The results provide a basis for seismic design and safety evaluation of high arch dam concrete.