Abstract:For axial turbines, tip leakage vortex and passage vortex flow are responsible for a large part of the aerodynamic loss. To pursue higher turbine efficiency, many methods are undertaken to eliminate the tip leakage loss. In this work, by experimental and numerical methods, novel wave-shaped tip-shroud contours on the unshrouded turbine cascade were proposed. In a low-speed large-scale linear turbine cascade facility, a traditional flat tip was first conducted to comprehensively validate the numerical tool, especially the inlet conditions and the total pressure loss due to the tip leakage loss. The numerical settings were kept the same as the experimental facility. It achieved a satisfactory agreement between the CFD and experiments. It was found that in a flat tip case, a large, integral tip leakage vortex structure was identified and responded to the aerodynamic loss within the tip leakage core. Then a series of novel wave-shaped tip-shroud contours were considered in the current turbine cascade. The overtip flow exited the suction side tip gap, and the peak mass flow rate was concentrated around the troughs of the wave tip. Several small-sized, but stronger-vorticity-magnitude vortex structures were identified. By breaking down a large, integral vortex structure into several smaller-scale vortices, the vortex evolution was beneficial for the turbine efficiency. Although a slight enhancement of passage vortex was identified, the overall loss reduction of 3.0% was achieved by reducing the tip leakage loss, which dominated the loss contribution. According to the real working condition, axial displacement for the blade was considered. Within the current scope, the maximum reduction of tip leakage loss coefficient was reduced by 14.6% compared to the flat tip case. It was mainly contributed by the smaller contraction coefficient within the tip gap, which reduced the overtip leakage mass flow. Meanwhile, the vena contracta within the tip gap was altered, as well as static pressure distribution on the tip surface. As a result, the minimum static pressure was re-distributed at the throat of the tip gap. It was proven that this novel wave-shaped tip-shroud contour was an efficient way to improve the aerodynamic performance at a larger tip gap.(c) 2022 Elsevier Ltd. All rights reserved.

Effects of Casing Air Injection Position on Controlling Tip Clearance Flow in Axial Turbines

Vortex structure control based bleed in axial compressor cascade with tip clearance using large eddy simulation

Controlling Leakage Flows Over A Rotor Blade Tip Using Air-Curtain Injection: Part Ii - Rotor Casing Film Cooling

Effects of Suction Surface Near Tip Coolant Injection on the Aerodynamics of Tip Leakage Flow in a High-Pressure Turbine Cascade

Controlling Leakage Flows Over a Rotor Blade Tip Using Air-Curtain Injection: Part I — Aero-Thermal Performance of Rotor Tips

Tip Injection in Transonic Axial Compressor Rotor

Numerical Study of Two Types of Rough Groove in Suppressing the Tip Clearance Cavitation

Numerical Study of Porous Tip Treatment in Suppressing Tip Clearance Vortices in Cavitating Flow

Effects of the circumferential casing groove configuration on aerothermal performance of a transonic turbine stage

Effects of the casing step size on the tip leakage flow pattern and heat transfer characteristic of turbine blade squealer tip

A Numerical Study of the Effect of Endwall Injection Inclination Angle on a High Pressure Turbine Cascade Performance

Design strategy of axial slot casing treatment for a transonic compressor rotor based on parametric analysis

Effects of Sloped Trench Casing Treatment Combined with Air Injection on Stall Triggering Factor of a 1.5 Stage Axial Flow Compressor

Numerical Study on the Response of Tip Leakage Flow Unsteadiness to Micro Tip Injection in a Low-Speed Isolated Compressor Rotor

Influence of Tip Clearance on Cavitation Characteristics of an Inducer of Turbopump: CFD Study

THE EFFECTS OF CASING PROFILE ON THE AERODYNAMICS OF INTEGRATED INTERMEDIATE TURBINE DUCTS

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Leakage Flow Mixing in Shrouded Axial Turbines and Its Control Strategies Using Casing Optimization

Design optimization of a hybrid casing treatment based on axial momentum budget analysis in the tip flow region

Aerothermal Performance of Different Tips in Transonic Turbine Cascade with End-Wall Motion

Novel Wave-Shaped Tip-Shroud Contours Towards Reducing Turbine Leakage Loss