Abstract:Non-contact methods, which are of great significance to the measurement of river discharge, can not only improve the efficiency of measurement but can also ensure the safety of equipment and personnel. However, owing to their inherent drawbacks such as the requirement of riverbed topography measurements and the difficulty in determining hydrological parameters such as equivalent roughness height, velocity index, etc., there are still challenges for measuring river discharge with high levels of efficiency and accuracy using non-contact methods. To overcome the aforementioned challenges, a new river discharge inversion method is proposed in this paper. In this method, vertical velocities are divided into inner and outer region velocities which can be described by the logarithmic law and the parabolic law, respectively. Applying the river surface velocities collected by microwave Doppler radar and the vertical velocity distributions, the water depths are estimated according to the continuity of the vertical velocities and the shear stresses, and then, the river discharges are obtained by the velocity–area method. The proposed method not only has a simple formula but also comprehensively considers the influence of different hydrological conditions, making it suitable for different river widths and water depths. In this paper, surface velocities collected by microwave Doppler radar on the Yangtze River and the San Joaquin River are used to invert the river discharge, and the results show that for wide–shallow, wide–deep, and narrow–shallow river conditions, the mean percent error (MPE) values of the discharges invertedby the proposed method are 3.91%, 3.82%, and 3.6%, respectively; the root mean square error (RMSE) values are 4.53%, 5.19%, and 4.81%, respectively; and the maximum percent error (MaPE) is less than 15%. The results prove that the proposed method can invert the river discharge with high efficiency and high accuracy under different river widths and water depths without measuring water depth in advance, making it is possible to automatically measure the river discharge in real time.

Direct Inversion Method of River Network Roughness Based on Data Mining

BP Neural Network Applied in Modeling of Water Distribution Network

A Method for Inverting Shallow Sea Acoustic Parameters Based on the Backward Feedback Neural Network Model

A robust river roughness calibration model

Back-propagation Artificial Neural Networks for Water Supply Pipeline Model

Enhancing the Accuracy of Water-Level Forecasting with a New Parameter-Inversion Model for Estimating Bed Roughness in Hydrodynamic Models

Inverse problem of an instantaneous pollution source in a wide and shallow river and the analysis on inversion accuracy

A River Roughness Calibration Model Based on Prior Information

Roughness Inversion of Water Transfer Channels from a Data-Driven Perspective

River Discharge Inversion Algorithm Based on the Surface Velocity of Microwave Doppler Radar

Remote Sensing Inversion of Typical Water Quality Parameters of a Complex River Network: A Case Study of Qidong's Rivers

Method of River Network Extraction of Coupling Level-Wise Deepening for Canal System with Predefined Watershed in Irrigation District of Dissipative River Basin

Two-Step Simulation of Underwater Terrain in River Channel

Prediction of Water Quality Index in Qiantang River Based on BP Neural Network Model

Application Research of Neural Network in River Elevation Map

RBF Network Simulation for a Karst Water System

Study on Deformation Mechanism and Parameter Inversion of a Reservoir Bank Slope During Initial Impoundment

Bathymetry Inversion Using a Deep‐Learning‐Based Surrogate for Shallow Water Equations Solvers

Simultaneous identification of groundwater pollution source and important hydrogeological parameters considering the noise uncertainty of observational data

Inversion of hydrogeological parameters using pilot-points and regularization method

Research on soil moisture inversion method based on GA-BP neural network model