Abstract:The anaerobic digestion model No 1 (ADM1), with fixed fractions of the substrate components, is currently used to simulate methane production during the anaerobic digestion (AD) of waste activated sludge (WAS). However, the goodness-of-fit for the simulation is not ideal due to the different characteristics of WAS from different regions. In this study, a novel methodology based on a modern instrumental analysis and 16S rRNA gene sequence analysis for the fractionation of organic components and microbial degraders in the WAS is investigated to modify the fractions of the components in the ADM1. The combination of Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and nuclear magnetic resonance (NMR) analyses were used to achieve a rapid and accurate fractionation of the primary organic matters in the WAS that was verified using both the sequential extraction method and the excitation-emission matrix (EEM). The protein, carbohydrate, and lipid contents in the four different sludge samples measured using the above combined instrumental analyses were 25.0 - 50.0%, 2.0 - 10.0%, and 0.9 - 2.3%. The microbial diversity based on 16S rRNA gene sequence analysis was utilized to re-set the initial fractions of the microbial degraders in the ADM1. A batch experiment was utilized to further calibrate the kinetic parameters in the ADM1. Based on the above optimization of the stoichiometric and kinetic parameters, the ADM1 with full parameter modification for WAS (ADM1-FPM) simulated the methane production of the WAS very well with a Theil's inequality coefficient (TIC) of 0.049, which was increased by 89.8% than that of the default ADM1 fit. The proposed approach, with its rapid and reliable performance, demonstrated a strong application potential for the fractionation of organic solid waste and the modification of ADM1, which contributed to a better simulation of methane production during the AD of organic solid wastes.

Modeling an Anaerobic Reactor with an Outside Recycling Line for Municipal Wastewater Treatment by Modified Anaerobic Digestion Model No. 1 (ADM1)

Examining a Pretty Simple and Low Cost Method for Modeling of Biogas Production from Biodegradable Solids

Examining A Hybrid Plug-Flow Pilot Reactor Foranaerobic Digestion of Farm-Based Biodegradable Solids

A First-Order Kinetic Model for Simulating the Aerobic Degradation of Municipal Solid Waste.

Modeling the Performance of Anaerobic Digestion Reactor by the Anaerobic Digestion System Model (ADSM)

A Model For Anaerobic Degradation Of Municipal Solid Waste

Anaerobic Co-Digestion of Municipal Biomass Wastes and Waste Activated Sludge: Dynamic Model and Material Balances

Modeling the dynamic performance of full-scale anaerobic primary sludge digester using Anaerobic Digestion Model No. 1 (ADM1)

A novel approach for the fractionation of organic components and microbial degraders in ADM1 and model validation based on the methanogenic potential

A hybrid approach of anaerobic digestion model no. 1 and machine learning to model and optimize continuous anaerobic digestion processes

Modification of Anaerobic Digestion Model No.1 with Machine Learning Models Towards Applicable and Accurate Simulation of Biomass Anaerobic Digestion

Dynamic Modeling the Anaerobic Reactor Startup Process

A Novel First-Order Kinetic Model for Simultaneous Anaerobic–Aerobic Degradation of Municipal Solid Waste in Landfills

Kinetic Characteristics and Microbial Community of Anammox-EGSB Reactor

Modifications to the anaerobic digestion model no. 1 (ADM1) for enhanced understanding and application of the anaerobic treatment processes - A comprehensive review

Kinetic of Ph Control in Anaerobic Digestion of Organic Fraction of Municipal Solid Waste in a Batch Reactor

Modification of Anaerobic Digestion Model No. 1 for modeling anaerobic digestion of cattle manure with changing solids retention time

A new integrated system for loading and scheduling in cellular manufacturing

ADM1-Based Modeling of Biohydrogen Production through Anaerobic Co-Digestion of Agro-Industrial Wastes in a Continuous-Flow Stirred-Tank Reactor System

Biref Introduction to Anaerobic Digestion Model No.1(ADM1)

A modeling approach to describe ZVI-based anaerobic system.