Abstract:With the development of tourism, the number of multistorey buildings in mountain areas is increasing gradually, and the requirements of the form and bearing capacity of foundation in landslide areas are getting more demanding than ever. In-situ testing of rock and soil mass in slope area has important practical significance for improving the stability of building foundation. Taking a project in Baishi Mountain located in southwest of China as an example, firstly, the geological structure and mechanical properties of soil are analyzed. Then, two types of pile foundations, i.e., empty-bottom pile foundations and solid-bottom pile foundations, are designed based on the characteristics of the geological structure for carrying out the static load test on pile foundation. The test results are as follows: (a) the load settlement curve (Q-S) of the empty-bottom test pile shows a steep drop, while the Q-S curve of the solid-bottom test pile shows a gradual change, showing that the end-bearing friction pile's property and the ultimate bearing capacity of the solid-bottom pile are higher than those of the empty-bottom pile. (b) The maximum lateral friction of the four test piles is 139.158 kPa, 148.015 kPa, 150.828 kPa, and 154.956 kPa, respectively. (c) The shaft skin resistance under ultimate load is coming close to the maximum value, and the maximum values are 9.792 mm, 7.939 mm, 9.881 mm, and 14.97 mm, respectively. Research results can serve as design bases for the pile foundation of multistorey buildings located in landslide areas of Baishi Mountain in the southwest of China and also as references for the engineering application of pile foundation in similar geological fracture areas.

EXPERIMENTAL STUDY OF LOAD TRANSMISSION PROPERTY OF LARGE-DIAMETER BORED CAST-IN-SITU DEEP AND LONG PILE IN DIFFERENT SOIL LAYERS

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Experimental study of the bearing properties of large-diameter and super-long bored pile in Wuxi

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Bearing Capacity and Load Transfer Mechanism of a Static Drill Rooted Nodular Pile in Soft Soil Areas

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

Bearing behavior of cast-in-place piles with similar slenderness ratios in deep soil layer

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

ANALYSIS OF BEARING PROPERTIES OF LARGE-DIAMETER AND SUPER-LONG BORED PILE IN COHESIVE SOIL AND SINGLE PILE SETTLEMENT

Field Experimental Study of Lateral Load Capacity of Bored Pile in Soft Soil

A test on base bearing capacity of static drill rooted nodular pile

Study on Bearing Characteristic of Large-diameter Deep-socketed Pile and Pile Length Design

Studies on Bearing Characteristic of Open-Ended and Close-Ended Pipe Piles under High-Speed Railway Loadings

Field Test on the Influence of the Cemented Soil Around the Pile on the Lateral Bearing Capacity of Pile Foundation

Statistical research on performance of prestressed concrete pipe piles

Experimental Study on Static Load of Large-Diameter Piles in Nonuniform Gravel Soil