Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Lightweight robotic arms are one of the main technologies to improve the working performance of robotic arms in the future. Focusing on the spatial vibrations issue brought about by the light-weighting of a space robotic arm in this paper, a rigid–flexible coupling dynamics model of a space robotic arm system was established based on the assumed mode method and Lagrange method. Based on the lightweight flexible robotic arm structure, a comparative analysis of the first four mode functions was conducted under different fixed constraints and physical properties to determine the mode order that matches the simulation analysis of this robotic arm, thus, further simplifying the rigid–flexible coupling dynamics equations of the system. The overall rigid model and simplified dynamic model of the robotic arm system were solved by using MATLAB, resulting in a motion trajectory of the flexible arm end in space. The three-dimensional model was validated and simulated using virtual prototype technology under the same joint inputs as the model in MATLAB. The simulation results demonstrated that the trajectory of the end of the flexible arm was basically the same between simplified dynamics model simulation and virtual prototype simulation, and the maximum deviation of the end trajectories of the flexible connecting rods [math] and [math] was less than 18[math]mm and 58[math]mm, respectively. Meanwhile, the trajectory trend of the end of the flexible arm in the two aforementioned models was the same as the simulation results of the ideal model (overall rigid model). The above conclusions can verify the correctness of the mathematical model of dynamics obtained from the calculations in this paper. In addition, the research data showed that the maximum vibration deviation of the flexible arm was stabilized within a certain value range under different joint inputs, and this research also provided theoretical support for the late vibration suppression control of the spatial rigid–flexible coupled robotic arm.

A free-interface component mode synthesis method based on residual dynamic flexibility

Substructure Synthesis Method Considering Dynamic Behavior of Joints

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Improved Component-Mode Synthesis for Nonclassically Damped Systems

Dynamic Sensitivity Analysis of Complex Structure Based on FEM

EXACT MODAL SYNTHESIS METHOD USING MID/HIGH-ORDER SUBSTRUCTURE MODES

Studying on the Technique of Integration Analysis to Rigid-Flexible Mixture Virtual Prototyping in Complex Mechanic System

Fixed-interface Component Mode Synthesis Using Proper Orthogonal Decomposition

A modal synthesis method based upon dynamic stiffness on interface

EXACT MODAL SYNTHESIS TECHNIQUES USING RESIDUAL CONSTRAINT MODES

A Free‐interface Component Mode Synthesis of Moving Contact Multibodies and Its Application to Gear Contacts

Dynamic Modeling and Optimization Analysis of Rigid–Flexible Coupling Manipulator Based on Assumed Mode Method

An Enhanced Kron's Component Modal Synthesis Method

A Novel Method for Constructing a Dynamics Model with the Flexible Characteristics

A Semi-Analytical Modeling Method for the Static and Dynamic Analysis of Complex Compliant Mechanism

Nonlinear dynamical modeling and response analysis of complex structures based on assumed mode weighting

Mode Selection for Component Mode Synthesis with Guaranteed Assembly Accuracy

A Novel Mechanical Model Based on the Dynamic Stiffness Matrix for Unified Dynamic and Static Modeling of Planar Compliant Mechanisms

Component Modal Selection for Flexible Multi-Body Dynamics

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

Study on the Component-Based Model of Semi-Rigid Beam-to-column Joints Initial Stiffness