Abstract:Abstract With increasing demand for rotor blades in engineering applications, improving the performance of such structures using morphing blades has received considerable attention. Resonant passive energy balancing (RPEB) is a relatively new concept introduced to minimize the required actuation energy. This study investigates RPEB in morphing helicopter blades with lag–twist coupling. The structure of a rotating blade with a moving mass at the tip is considered under aerodynamic loading. To this end, a three-degree-of-freedom (3DOF) reduced-order model is used to analyse and understand the complicated nonlinear aeroelastic behaviour of the structure. This model includes the pitch angle and lagging of the blade, along with the motion of the moving mass. First, the 3DOF model is simplified to a single-degree-of-freedom model for the pitch angle dynamics of the blade to examine the effect of important parameters on the pitch response. The results demonstrate that the coefficient of lag–twist coupling and the direction of aerodynamic moment on the blade are two parameters that play important roles in controlling the pitch angle, particularly the phase. Then, neglecting the aerodynamic forces, the 3DOF system is studied to investigate the sensitivity of its dynamics to changes in the parameters of the system. The results of the structural analysis can be used to tune the parameters of the blade in order to use the resonant energy of the structure and to reduce the required actuation force. A sensitivity analysis is then performed on the dynamics of the 3DOF model in the presence of aerodynamic forces to investigate the controllability of the amplitude and phase of the pitch angle. The results show that the bend–twist coupling and the distance between the aerodynamic centre and the rotation centre (representing the direction and magnitude of aerodynamic moments) play significant roles in determining the pitch dynamics.

Damped vibration characteristics of blades with tips of an aero-engine

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Design and Hover Test of Low Vibration Mach Scale Rotor with Twisted Composite Tailored Blade

Study on Discrete Modeling Method of Modal Testing for Turbine Blade

Vibration Equation and Frequency Computation of an Aero-engine Rotor Blade

EXPERIMENTAL INVESTIGATION OF THE DYNAMIC CHARACTERISTICS OF THE DAMPED BLADE

Vibrational responses and fatigue life of dynamic blades for compressor in gas turbines

Dynamic response analysis of shrouded blades under impact-friction considering the influence of passive blade vibration

General dynamic model of aeroengine's rotor system during maneuvering flight

Experimental and Numerical Quantification of the Aerodynamic Damping of a Turbine Blisk

Vibration characteristics analysis of a type of turbine disk-blade assembly system in the civil aero-engine

Study Of Snubbing Mechanism Using Finite Element Method

Study for the Optimal Design of the Vibration Characterist ics of Damped Blades

Vibration performance of rotating thin-walled cylindrical shell with tip-rubbing excitation between drum and stator vane segment of aero-engine

Analysis on Influences of Squeeze Film Damper on Vibrations of Rotor System in Aeroengine

Vibration characteristics on a wind turbine rotor using modal and harmonic analysis of FEM

Nonlinear Dynamics and Combination Resonance of a Flexible Turbine Blade with Contact and Friction of Shrouds

Dynamic modeling and verification of rotating compressor blade with crack based on beam element

Dynamic characteristic analysis of rotating blade with breathing crack

Vibration response analysis of blade-disk dovetail structure under blade tip rubbing condition

Resonant passive energy balancing of morphing helicopter blades with bend–twist coupling