Abstract:PurposeThe vibration resonance of a high-pressure rotor system is a research topic with a series of support structures and the elastic ring squeeze film damper (ERSFD). A dynamic equation with the multiple degrees of freedom rotor system was estimated for multi-support structures, the ERSFD, and the rotor. Semi-analytical and semi numerical solutions were analyzed for their dynamic characteristics.MethodsAccording to the finite length bearing theory based on the partial differential equation, four oil film pressure models were established and derived to construct four contact models proposed by Russian scholars, considering the geometrical structure of the elastic ring with bosses and oil holes. The semi-analytical and semi-numerical approximate analytical solutions of dynamic equations were derived theoretically using the incremental harmonic balance (IHB) and arc-length methods, which were established for the excitation force, oil film force, and eccentricity. Finally, the sudden imbalance and eccentric faults were analyzed by numerical simulations, and the vibration response was obtained.ResultsThe smaller the oil film gap, the more significant the oil film force produced by the elastic ring and rotor squeezing each other. The amplitude of the rotor increases with an increase in unbalanced values and the static eccentric moment. When the center of the axis orbit changes significantly, it causes rubbing and grinding of the rotor.ConclusionFour different contacts and the approximate analytical solution of the oil film force describe the movement process and force of the elastic ring and the rotor more clearly. The IHB method is more effective and feasible than the Runge-Kutta method for obtaining the unstable solution of the dynamic equation. It provided a theoretical basis for fault diagnosis and the dynamic design of complex rotor systems.

Vibration performance of rotating thin-walled cylindrical shell with tip-rubbing excitation between drum and stator vane segment of aero-engine

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

Dynamic Response of Rubbing Happening in A Flexible Rotor-Bearing System

Dynamic Characteristics of Rotor System and Rub-Impact Fault Feature Research Based on Casing Acceleration

Study on Vibration and Bifurcation of an Aeroengine Rotor System with Elastic Ring Squeeze Film Damper

Dynamics Analysis Of A Rigid Rotor System With Drum On Supports

Nonlinear vibration response of a complex aeroengine under the rubbing fault

Study on Rubbing-Induced Vibration Characteristics Considering the Flexibility of Coated Casings and Blades

Radial Vibration Characteristics of a Double-overhung Rub Rotor

Vibration response analysis of blade-disk dovetail structure under blade tip rubbing condition

Multilevel finite element modeling and coupling vibration analysis of the drum in blade–disk–drum assembly

Study on the Semi-numerical and Semi-analytical Solutions of the Dynamics Equation of an Aero-engine Rotor System with ERSFD

Dynamics analysis and experiment research of vibration response for dual-rotor system under rubbing fault

Study on theoretical modeling and vibration performance of an assembled cylindrical shell-plate structure with whirl motion

Study on Rubbing Failure Between Fan Vanes and Spacer Ring of a Turbo-Fan Engine

Investigation of the Vibration Transmission Characteristics of the Aero-Engine Casing System by Rotating Force Exciter

Vibration analysis of a dual-rotor-bearing-double casing system with pedestal looseness and multi-stage turbine blade-casing rub

Research on Structural Vibration Reduction Technology of Rotating Machinery Based on Dynamic Vibration Absorption

Dynamic Characteristics of Rub-Impact on Rotor System with Cylindrical Shell

Dynamics research on the rubbing process and rubbing forms of rotor–blade–casing systems