Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Current-based Feed Axis Condition Monitoring and Fault Diagnosis

NC Machine Tool Spindle Condition Monitoring System Based on Motor Current

Fault Diagnosis of A Machine Tool Rotary Axis Based on A Motor Current Test and the Ensemble Empirical Mode Decomposition Method

Monitoring and Diagnosis of Machine Tool Drive System Based on Motor Current Signal

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Feed-Axis Gearbox Condition Monitoring Using Built-In Position Sensors and Eemd Method

Research of Diagnosis and Analysis Based on Motor Current Signal of Machine Tool

Fuzzy estimation of feed-cutting force from current measurement-a case study on intelligent tool wear condition monitoring

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

An Improved Current Sensor Fault Diagnosis and Fault-tolerant Control for Multisector Permanent Magnet Synchronous Motor

Rapid Identification for Feed-axis Lubrication Condition of Large Scale Numerical Control Machine Tools

A Current Product Signal Analysis Method For Rotor Fault Diagnosis In Induction Motors

Induction Motor Condition Monitoring for Sustainable Manufacturing

Motor Current-Based Cutting Force Induced Error Detection and Modeling for Cnc Milling Machine

Diagnostic System for Current-Carrying Fault: Modeling, Precaution, and Prediction

Concordia Transform-Based Current Analysis for Induction Motor Diagnosis

Intelligent Condition Monitoring Of Rotating Machinery Through Electrostatic Sensing And Signal Analysis

Model-driven condition monitoring and diagnosis in digital machining process

A Fault Diagnosis Method for Current Sensor of Doubly Salient Electromagnetic Motor

Condition Monitoring and Feature Extraction of Stator Current Phasors for Enhanced Fault Diagnosis in AC Drive

MCSA-based Fault Diagnosis Technology for Motor Drivetrains