Abstract:Low-power consumption has been always a crucial design constraint for an efficient intellectual property based three-dimensional multi-core system that cannot be ignored easily. As the complexity increases due to the number of cores/stacks/ layers in 3D digital systems, the challenges to handle power can be more difficult at a high abstraction level. Therefore, the low-power approach gives designers an opportunity to estimate and optimize the power consumption in the early stages of design phases. The accurate power estimation through the macro-modeling approach at high-level reduces the risk of redesign cycle and turn-around time. In this research, we have presented an improved statistical macro-modeling approach that estimates power through statistical characteristics of randomly generated input patterns by using Biogeography Based Optimization. These input patterns propagate signals into an IP-based 3D digital test system. In experiments, the test system is based on four 8 to 32- bits heterogeneous cores. The response of the power is monitored by applying the well-known Monte Carlo Simulation technique. The entire power estimation method is performed in two major steps. First, the average power is estimated for an IP-based individual core. Second, the average power for bus-based Through-Silicon-Via is estimated. Finally, the cores and B-TSVs are integrated together to construct a 3D system. Then the average power for complete test systems is estimated. The experimental results of the statistical power macro-model are compared with the commercial Electronic Design Automation power simulator at the operating frequency of 100 MHz. The average percentage error of the test system is calculated as 8.65%. For the validation of these results, the statistical error analysis is additionally performed and reveals that our proposed macro-model is accurate in terms of percentage of error with a feasible amount of time.

An efficient methodology for power modeling and simulation of modern cell-based microprocessors

A Silicon-Validated Methodology for Power Delivery Modeling and Simulation

SoC performance modeling methodology and implementation basedon transaction dataflow

Power Profiling for Low Power Optimization Using New Computing Model

A Physical-Annotation-Based Power Modeling and Estimation Method for Processor

A Simplification Method for Power Device Thermal Modeling with Quantitative Error Analysis

Silicon-Validated Power Delivery Modeling and Analysis on a 32-Nm DDR I/O Interface.

Accurate CPU Power Modeling for Multicore Smartphones

Enabling Accurate and Efficient Modeling-Based CPU Power Estimation for Smartphones

A Fast Approach For System-Level Power Modeling And Simulation

Architectural Power Models for Sram and Cam Structures Based on Hybrid Analytical/empirical Techniques

Efficient power macromodeling approach for heterogeneously stacked 3d ICs using Bio-geography based optimization

Architecture-level Power Modeling and Analyzing for Reconfigurable Processor

PMCC: Fast and Accurate System-Level Power Modeling for Processors on Heterogeneous SoC

An Efficient Power Estimation Approach for the Synchronous Data Transfer Architecture

An Embedded Software Fusion Power Model Based on Algorithm and Micro-architectural Level

Highly accurate power modeling method for SRAM structures with simple circuit simulation

Study on Methodology of Algorithm Analysis for Energy

Automated PMC-based Power Modeling Methodology for Modern Mobile GPUs

A Power Modelling Approach for Many-Core Architectures.

Cross Architectural Power Modelling