Abstract:Low-power consumption has been always a crucial design constraint for an efficient intellectual property based three-dimensional multi-core system that cannot be ignored easily. As the complexity increases due to the number of cores/stacks/ layers in 3D digital systems, the challenges to handle power can be more difficult at a high abstraction level. Therefore, the low-power approach gives designers an opportunity to estimate and optimize the power consumption in the early stages of design phases. The accurate power estimation through the macro-modeling approach at high-level reduces the risk of redesign cycle and turn-around time. In this research, we have presented an improved statistical macro-modeling approach that estimates power through statistical characteristics of randomly generated input patterns by using Biogeography Based Optimization. These input patterns propagate signals into an IP-based 3D digital test system. In experiments, the test system is based on four 8 to 32- bits heterogeneous cores. The response of the power is monitored by applying the well-known Monte Carlo Simulation technique. The entire power estimation method is performed in two major steps. First, the average power is estimated for an IP-based individual core. Second, the average power for bus-based Through-Silicon-Via is estimated. Finally, the cores and B-TSVs are integrated together to construct a 3D system. Then the average power for complete test systems is estimated. The experimental results of the statistical power macro-model are compared with the commercial Electronic Design Automation power simulator at the operating frequency of 100 MHz. The average percentage error of the test system is calculated as 8.65%. For the validation of these results, the statistical error analysis is additionally performed and reveals that our proposed macro-model is accurate in terms of percentage of error with a feasible amount of time.

Power Profiling for Low Power Optimization Using New Computing Model

A Silicon-Validated Methodology for Power Delivery Modeling and Simulation

A Multicore Chip Load Model for PDN Analysis Considering Voltage–Current-Timing Interdependency and Operation Mode Transitions

Modeling Power Consumption of Applications in Wireless Communication Devices Using OS Level Profiles

PowerSpector: Towards Energy Efficiency with Calling-Context-Aware Profiling

Efficient and Precise Profiling, Modeling and Management on Power and Performance for Power Constrained HPC Systems

Multi-Optimization Power Management for Chip Multiprocessors

Whole Procedure Heterogeneous Multiprocessors Low-Power Optimization at Algorithm-Level.

Study on System-Level Power Model for Low Power Optimization

A Power Modelling Approach for Many-Core Architectures.

An Instruction-Level Analytical Power Model for Designing the Low Power Systems on a Chip

An efficient methodology for power modeling and simulation of modern cell-based microprocessors

A Fast Approach For System-Level Power Modeling And Simulation

An Instruction-Level Analytical Power Model For Designing The Low Power Soc

Watts-inside: A hardware-software cooperative approach for Multicore Power Debugging

A Physical-Annotation-Based Power Modeling and Estimation Method for Processor

Power optimization using Markov decision process based on multi-parameter constraint modeling

Study of a low power optimization method based on multithreaded load imbalance for embedded multicore

Efficient power macromodeling approach for heterogeneously stacked 3d ICs using Bio-geography based optimization

A functionality based instruction level software power estimation model for embedded RISC processors

Modeling the Power Consumption of Multiple Typical Applications Based on Linux