Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

An Optimized Signal Control Method for a Freight Arterial Transport System

A Green Wave Band Based Method for Urban Arterial Signal Control

Based on Simulation Method for Solving Traffic Jam Problems.

Optimization of Stretching-Segment Design and Signal Timing in Traffic Control

Adaptive and multi-path progression signal control under connected vehicle environment

Signal coordination control for traffic bottleneck using OD data

A Method of Signal Timing Optimization for Spillover Dissipation in Urban Street Networks

Traffic Scheduling and Control in Fully Connected and Automated Networks

Bus signal priority method at arterial signal progression

Simulation of the Frontage Road Control Near the Expressway Exit Ramp

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Research on offset optimization of signalized arterials

Heterogeneous Traffic Flow Signal Control and CAV Trajectory Optimization Based on Pre-Signal Lights and Dedicated CAV Lanes

An Adaptive Traffic Signal Coordination Optimization Method Based on Vehicle-to-infrastructure Communication

On-ramp metering control strategy of urban expressway

Research on signal control methods of traffic bottlenecks in city road network

Simulation analysis of traffic signal control and transit signal priority strategies under Arterial Coordination Conditions

A Macroscopic Signal Optimization Model for Arterials Under Heavy Mixed Traffic Flows

A dynamic optimization method for adaptive signal control in a connected vehicle environment

Traffic Signal Coordination Control for Arterials with Dedicated CAV Lanes

Integrating traffic signal optimization with vehicle microscopic control to reduce energy consumption in a connected and automated vehicles environment