Abstract:A numerical study is performed to analyze the effect of small control cylinders on fluid force reduction and vortex shedding suppression on the flow past three inline square cylinders using the lattice Boltzmann method. The Reynolds number Re = 160 is fixed while the spacing between the cylinders is taken in the range of 1.0D ≤ g* ≤ 5.0D (where D is the size of the main cylinder) and the control cylinder size is varied from 0.1D to 0.5D. To systematically understand the effect of control cylinders on the forces, a detailed analysis of Strouhal number (St), mean drag coefficient (CDmean), and root mean square values of the drag and lift coefficients is presented in this paper. In this study, it is observed that the average mean drag coefficient (CDmeanaverage) and Strouhal number reached either maximum or minimum values at different values of separation ratio (g*) and small control cylinder size (d). It is found that at (g*, d) = (5.0, 0.0) and (1.0, 0.5), the average CDmean attains its maximum (CDmeanaverage = 0.7813) and minimum (CDmean = 0.0988) values. Furthermore, at (g*, d) = (5.0, 0.3) and (2.0, 0.0) the average St attains its maximum (St = 0.1780) and minimum (St = 0.041) values. It is found that the flow regimes completely change in the presence of control cylinders. In particular, at g* = 4.0 there is a critical flow regime when the size of the control cylinder changes from 0.1 to 0.5. The sudden jump in the mean drag coefficient and Strouhal number for the middle cylinder with their maximum and minimum values also confirms the critical flow regime. The effect of control cylinders within tandem square cylinders has not been studied before.

Numerical study of fluid force reduction on a square cylinder using a control plate

Numerical Study of Reduction of Fluid Forces Acting on a Square Cylinder Using a Control Plate

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

Numerical Study of Flow Control Via the Interaction Between a Circular Cylinder and a Flexible Plate

Numerical Investigation of Fluid Flow Past a Square Cylinder Using Upstream, Downstream and Dual Splitter Plates

Improvement of vortex shedding control and drag reduction on a square cylinder using twin plates

A computational study of drag reduction and vortex shedding suppression of flow past a square cylinder in presence of small control cylinders

Numerical Study of Flow Characteristics Behind a Stationary Circular Cylinder with a Flapping Plate

Influence of an upstream attached flat plate on the Newtonian flow past a square cylinder

Numerical investigation of vortex-induced vibration of a circular cylinder with a hinged flat plate

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Flow control around two side-by-side square cylinders using dual splitter plates

Fluid Dynamics Around Three Cylinders in Presence of Small Control Cylinders

Numerical Study of Transverse Galloping and Vortex-Induced Vibrations of Square Cylinder

Direct Numerical Simulations on the Flow Past a Thin Square Plate

Study on the Numerical Simulation of Cylinder Vortex-Induced Vibration Controlled by Separating Plate

Investigation of flow characteristics around a stationary circular cylinder with an undulatory plate

Numerical Study of the Interaction Between an Internal Solitary Wave and a Submerged Extended Cylinder Using OpenFOAM

Numerical Simulation Study on a Passive Jet Flow Control Method to Suppress Unsteady Vortex Shedding from a Circular Cylinder

Numerical analysis of turbulent forced convection and fluid flow past a triangular cylinder with control plate using standard $κ$-$ε$ model

A drag and lift passive control study of Carreau–Yasuda fluid in a channel with a cylinder rooted in a transient flow