Abstract:Abstract A realistic prediction of the concrete fatigue life exposed to high-cycle loading scenarios with variable amplitudes is of utmost importance for a reliable and economically efficient design of civil engineering infrastructure for transport and energy supply. Current design codes estimate the fatigue life under variable amplitudes using the Palmgren–Miner rule, which assumes a linear scaling between lifetimes measured for uniform cyclic loading scenarios. Several experimental series conducted in the past, however, indicate that this assumption is not valid and that it may lead to unsafe design. In this paper, an experimental and theoretical investigations of the fatigue loading sequence effect in normal- and high-strength concrete behavior are presented, which confirm this observation. In particular, a test campaign with 135 cylinder specimens, including three concrete grades and six different loading scenarios has been conducted. Several response characteristics of the fatigue behavior including Wöhler curves, fatigue creep curves and evolving shapes of hysteretic loops have been evaluated. To substantiate the experimental results, a theoretical explanation of the observed sequence effect is formulated based on the assumption, that energy is dissipated uniformly within the volume of a test specimen during subcritical, compressive cyclic loading. Then, superposition of energy dissipation profiles along the lifetime measured for constant amplitudes becomes possible and a theoretical justification of the experimentally observed sequence effect can be provided. Moreover, a reverse sequence effect reported in the literature for bending fatigue of concrete can then be explained by an unevenly distributed energy dissipation over a cracked specimen. Supported by the theoretical consideration, the processed experimental data is used to validate existing fatigue life assessment rules by testing their ability to reflect the load sequence effect.

Fatigue capacity of plain concrete under biaxial fatigue stresses with one constant

Behavior of Concrete under Nonproportional Biaxial Fatigue Stresses with One Constant

Tensile Fatigue Properties of Ordinary Plain Concrete and Reinforced Concrete under Flexural Loading

Low-Cycle Fatigue Test of Circular Concrete Filled Tubular Columns

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

STUDY OF BEARING CAPACITY AND COMPLETE STRESS-STAIN CURVES FOR CONCRETE FILLED SQUARE STEEL TUBE COLUMNS

Numerical Analysis of High and Low‐cycle Flexural Fatigue for Reinforced Concrete Beams under Full‐range of Varying Amplitudes

Size Effect On Fatigue In Bending Of Concrete

Experimental Study on the Fatigue Damage of High Strength Concrete under Uniaxial Compression

Experimental Study on Fatigue Behavior of Prefabricated High-Strength Steel-Concrete Composite Bridge Beams

Damage constitutive of concrete under uniaxial alternate tension?compression fatigue loading based on double bounding surfaces

Biaxial Behaviour Of Plain Concrete Subjected To Dynamic Compression With Constant Lateral Stress

Experimental Study on Dynamic Biaxial Tension-Compression Properties of Hydraulic Concrete

Mechanical performance of steel-polypropylene hybrid fiber reinforced concrete subject to uniaxial constant-amplitude cyclic compression: Fatigue behavior and unified fatigue equation

Damage Degradation of Concrete Due to Compressive Fatigue Loading

Fatigue Strain and Damage Analysis of Concrete in Reinforced Concrete Beams under Constant Amplitude Fatigue Loading

Fatigue Deformation Model of Plain and Fiber-Reinforced Concrete Based on Weibull Function

Experimental study on direct tensile fatigue performance of basalt fiber reinforced concrete

Experimental and theoretical evidence for the load sequence effect in the compressive fatigue behavior of concrete

Fatigue performance analysis of precast segmental assembled concrete beams

Bending-Shear Fatigue Behavior of Concrete Girder Bridges