Abstract:Self-stressing steel tube concrete is a novel composite structure created by substituting ordinary concrete with self-stressing expansion concrete within a steel tube. Compared to regular steel tube concrete, self-stressing steel tube concrete structures can overcome the limitation that ordinary steel tube concrete is prone to voids. Many engineering studies have shown that these structures are prone to fatigue damage at the welded joints of steel tubes under repeated loads. Factors such as welding residual stress, welding defects, and stress concentration contribute to this susceptibility, which could potentially lead to catastrophic accidents. In this study, fatigue tests and finite element analysis were conducted on self-stressed concrete-filled steel tube joints of DY-type joints. The fatigue behavior of the joints under alternating loads was investigated through experiments and validated with the finite element analysis results. The impact of concrete's self-stress on joint fatigue performance was examined, including the stress concentration factor (SCF) and geometric parameters such as the ratio of the branch pipe outer diameter to the main pipe outer diameter, the ratio of the main pipe's outer radius to its wall thickness, the ratio of the branch pipe wall thickness to the main pipe, and the correlation between the angle of the main pipe and the branch pipe. The research results show that the node can withstand 2 million alternating loads without failure under a fatigue stress amplitude of 47.2 MPa. Additionally, the fatigue life of the test model under variable amplitude loads is converted into that under constant amplitude loads. The fatigue life of the node indicates that it can withstand 4.16 million cycles under the given fatigue amplitude before fatigue cracks appear. Additionally, variations in geometric parameters can impact the fatigue life of the node, but do not lead to changes in the initiation position of fatigue cracks. Moreover, as self-stress increases, the fatigue performance of the tube node will decrease, although the effect of self-stress on the stress distribution around the weld is minimal.

Fatigue design of square hollow section tubular T-joints with concrete-filled chords under in-plane bending

Design of concrete filled tubular CHS T-joints under in-plane bending

Experimental study of the static behavior of tubular N-joints

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Concrete-Filled Steel and Steel Tubular T-Joints under Cyclic In-Plane Bending

Behaviour Of Concrete-Filled Tubular T-Joints Under In-Plane Bending Cyclic Loading

Low-Cycle Fatigue Test of Circular Concrete Filled Tubular Columns

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Experiment investigations of stress concentration factor of concrete-filled tubular T joints

02.05: Design of concrete-filled steel tubular longitudinal gusset plate connections

Study on In-Plane Behavior of Thin-walled Concrete-filled Steel Tubular Gusset Plate T-joints

STRUCTURAL STRESS METHOD FOR FATIGUE DESIGN OF CONCRETE FILLED STEEL TUBULAR T-JOINTS UNDER AXIAL LOADING

Experimental Investigation of Concrete-Filled Steel Tubular Longitudinal Gusset Plate Connections

Experimental and numerical analyses on stress concentration factors of concrete-filled welded integral K-joints in steel truss bridges

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Behaviour of high-strength CFDST chord to CHS brace T-joint: Experiment

The Fatigue Performance of DY-type Joints in Self-Stressed Concrete-Filled Steel Tubes

Expressions for Stress Concentration Factors for T-Joints of Hollow and Concrete-Filled Square Cross-Sections for In-Plane Axial and Bending Loads

Study of energy dissipation mechanism of concrete-filled steel tubular T-joints

Fatigue tests of multiplanar concrete-filled steel tubular KK-joints with inner ring stiffeners