Abstract:Abstract Long-distance water supply systems are important measures to improve the water resources distribution, and the water hammer protection devices such as air vessels are usually added in the project to ensure the safety and stable operation. However, the sediment particles are always ignored in the design. Hence, a numerical model and program were established for sediment laden water hammer based on the method of characteristics (MOC). Using the proposed model, the water hammer protection influences of sediment particles parameters are simulated for the same pipeline system of a water supply project. The result shows that the resistance loss of sediment-laden water in pipelines is larger than that of water, and the initial head of pump needed to be increased to ensure the water levels of downstream reservoirs are consistent. After power failure and pump stopping, the negative pressure wave of sediment-laden water is 2.97 m higher than that of water, and the theoretical minimum internal pressure along pipelines is 7.8 m lower. With the same air vessel protection, the lowest minimum internal pressure heads along pipelines decrease with the increase of quantities of sediment, while the results show no obvious influence by changes of median particle diameters. The lowest absolute pressure of pipeline could reach −0.69 m under the condition of 50 kg/m3 quantity of sediment and 0.05 mm median particle diameter. The relevant research results are of great significance sediment-laden water hammer numerical simulation and water hammer protection design.

Study of Resistance Distribution and Numerical Modeling of Water Hammer in a Long-Distance Water Supply Pipeline

Research on the characteristics and protection of water hammer in long-distance dual-pipe water supply systems

Analysis of water hammer in a long-distance water delivery project

Based on the Simulation of Water Hammer Weak Section Analysis of Long-distance Pipeline Operation

A Study of Dynamic Characteristics of Valve Control Hydr Aulic System with Long Pipeline

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Numerical Simulation of the Water Hammer Caused by Accidental Pump-stop in Long Water Supply Systems

A study of the numerical simulation of water hammer with column separation and cavity collapse in pipelines

Hammer Response Analysis in Airplane Hydraulic Pipeline

Establishment and analysis of water hammer prevention system in high-lift and long-distance water delivery system

Study on Optimal Surge Protection for High-Undulate Long-Distance Water Transmission Pipeline

Analysis of State-Changing Water Hammer in A Long Pipe

Analysis on Mathematical Model for Water Hammer in Pressure Pipeline and Discussion on Its Protection

Waterhammer in Long Distance Gravity Water Delivery Systems

Development of Smoothed Particle Hydrodynamics Based Water Hammer Model for Water Distribution Systems

Effect of errors in predicting the water hammer types and pressures in a simple pipeline

Water hammer analysis of district heating networks

3D CFD simulation and analysis of transient flow in a water pipeline

Case study: Water hammer protection in long distance water pipeline with ultra-high lift

Influences of Sediment Particles on Air Vessel Water Hammer Protection Effect in the Long-Distance Water Supply Systems

Numerical Simulation of Water Hammer in Pipeline System Using Efficient Wave Tracking Method