Abstract:Multipath is the dominant error source for most fixed Global Navigation Satellite Systems (GNSS) sites and stations. The presence of multipath, particularly the multipath effect on pseudorange measurement, seriously affects positioning accuracy. Unfortunately, multipath effect reduction is still a challenging issue in high-accuracy GNSS positioning applications due to its special properties. To minimize the impact of the multipath effect, this paper focused on pseudorange multipath mitigation. First, the frequency spectrum of the code-minus-carrier divergence (CMCD) for Global Positioning System (GPS), Global Navigation Satellite System (GLONASS), and BeiDou Navigation Satellite System (BDS) satellites observed in different environments were analyzed, where we found that periodic fluctuations appeared in GPS and GLONASS as well as medium earth orbit (MEO) and inclined geosynchronous satellite orbit (IGSO) of BDS satellites in some situations, which manifested as peaks in the frequency domain. The results showed that the location of the frequency peaks in the frequency domain, width, and basic frequency spectrum intensity were different between different satellites and environments, causing difficulty in reducing the error impact. To eliminate such period fluctuations mainly caused by the multipath effect, a novel method based on a frequency domain filter was proposed in this paper. One of the keys of the proposed method was the use of short-time Fourier transformation (STFT) in the GNSS signal data processing to calculate the accurate local frequency spectrum when code-minus-carrier divergence (CMCD) was assumed to be time varying. Once the frequency spectrum was obtained, a new spectrum peak extraction method was used to locate the peak frequency position. By interpolation and inverse Fourier transformation, the influence of the spectrum peaks could be effectively eliminated, thus improving pseudorange precision. The experimental results showed that the periodic multipath effect could be greatly reduced by the proposed method.

A new multipath estimation method for GPS signals

GPS Multipath Signal Estimation Method Utilizing Adaptive Filtering

A New Method for GNSS Multipath Mitigation with an Adaptive Frequency Domain Filter

A multipath mitigation discriminator for GPS receiver

An adaptive frequency-based C/N0-constrained multipath extraction and mitigation method for GNSS pseudorange measurements

Multipath mitigation of GPS signal based on improved EMD algorithm

A Fast & Precise Combined Algorithm for GPS Multipath Error Elimination

A Novel Method for Estimating Reflected Signal Parameters

Subspace Based Joint Delay and Direction of Arrival Estimation for GNSS Multipath Signals

Joint Delay and Angle Estimation for GNSS Multipath Signals Based on Spatial and Frequential Smoothing

A Frequency-Domain Multipath Parameter Estimation And Mitigation Method For Boc-Modulated Gnss Signals

A Subspace-based Spatial and Temporal Multipath Mitigation for Multi-antenna GPS Receiver.

Multipath Channel Characteristics And Multipath Life-Time Model Research For Different Gnss Orbit Satellites

Robust Statistical Detection of GNSS Multipath Using Inter-Frequency C/N0 Differences

An Improved Algorithm of Multipath Parameter Estimation

Real-time Single-Frequency GPS/BDS Code Multipath Mitigation Method Based on C/N0 Normalization

An Improved Method of Multi-path Signal Suppression for GPS

Theoretical and Experimental Investigations of GPS Multipath Effect Based on Improved Particle Filtering Algorithm

Real-time carrier phase multipath detection based on dual-frequency C/N0 data

Gps Multipath Mitigation Based On Improved Empirical Mode Decomposition

To improve the performance of GPS single point positioning under flood environment based on multi-CNR weight strategy and multipath mitigation