Abstract:In the direct laser deposition (DLD) process, it is common to employ constant processing parameters. The utilization of the constant parameters may lead to fluctuations in the dynamic evolution of the molten pool, primarily due to the intricate thermal effects involved, which will significantly impact the processing quality. To address this issue, this study proposed a closed-loop control approach that effectively modifies processing parameters in real time by targeting on the molten pool transient area. The type of the laser used in this study is a flat-top beam. Laser power, powder feeder rate, and scanning speed are the input variables of the study to control molten pool, considering the manufacturing system. The most suitable processing parameter to control the molten pool area was found to be the laser power by a set of orthogonal experiments, with a correlation coefficient of 0.706, and significance level of 0.002. Then, the dynamic response relationship between laser power and the molten pool area was mathematically characterized by a third-order transfer function model to simplify the complex physical model of the DLD process. Subsequently, a PID controller with a filtering coefficient and anti-windup compensation was chosen compared with the other controller. In the validation experiments, it was observed that the closed-loop processing group demonstrated improved stability in maintaining the molten pool transient area, with a notable decrease of 33.7% in variability compared to the open-loop processing group. As a result, the deposited layer of the closed-loop processing group exhibited a much more satisfying surface quality and heat affect zone than the open-loop group. This study established a third-order mathematical model of the dynamic molten pool and realized the optimization of deposition quality by controlling the molten pool transient area with an enhanced PID controller, providing a fundamental basis for improving the consistency of the direct laser deposition processing quality through the implementation of real-time feedback control of molten pool physics.

Intensity distribution optimal design for laser-dominated thermal loading

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Design And Manufacture Of Continuous Phase Diffractive Optical Element For Beam Transform

Inverse Design of the Radiation Temperature for Indirect Laser-Driven Equation-of-state Measurement

Optimization of Heat-Dissipation Structure of High-Power Diode Laser in Space Environments

Uniformity Of Pump Intensity Distribution In Diode-Array Side-Pumped Laser Rod

Design Method for Laser Target Simulator Illumination System With High Energy Utilization and High Uniformity

Thermal Analysis of the Laser-Induced Thermal Deformation of a Diffractive Optical Element in a Single-Aperture Coherent Beam Combining System

Investigation of thermal behavior of powder stream and molten pool during laser-based directed energy deposition

Numerical simulation of thermo-mechanical behavior in high power diode laser arrays

Optimization Strategy for the Velocity Distribution Based on Tool Influence Function Non-Linearity in Atmospheric Pressure Plasma Processing

Optimization of Beam Configuration in Laser Fusion Based on the Laser Beam Pattern

Role of Fictive Temperature Distribution Involved in CO2 Laser Polishing of Fused Silica and Its Optimization for Achieving Even Heat-Affected Zones

Computational Modeling and Experimental Validation of Thermal Stress and Melt Pool Characteristics Using High Power Laser Diode Beam on 7075 Aluminum Alloy

<title>Continuous-phase diffractive optical element for realizing uniform illumination on the plane nonperpendicular to the optical axis</title>

Continuous Phase Diffractive Optical Element for Uniform Focal Spot

Real-time closed-loop control of molten pool transient area in direct laser deposition via PID algorithm with enhanced robustness

Thermodynamics Analysis in LD Pump Nd:GGG Heat Capacity Laser under Different Pump Distribution

Model Heat Source Using Actual Distribution of Laser Power Density for Simulation of Laser Processing

Residual Stress Control Using Process Optimization in Directed Energy Deposition

Study on Temperature Distribution of Disk-Type Laser Based on Heat-Fluid-Solid Multiphysics Coupling Method