Abstract:Jacket foundations for offshore wind turbines, typically having three or four latticework legs, are mainly subjected to lateral loads induced by winds, waves and currents during their service life. An accurate assessment of the bearing capacity of these foundations is of great importance in the design. This paper presents a study into the monotonic lateral loading behavior of tetrapod piled jacket foundations in undrained clay, with the complex lateral loads being simplified to an equivalent lateral load acting at a certain height of the jacket. A centrifuge testing programme was undertaken to provide high-quality validation data for the development of a three-dimensional finite element model established using ABAQUS. The key parameters investigated are the spacing and embedment of the piles, the height to which the equivalent lateral load acts and the angle between the direction of this load and the orthogonal line of the jacket in the horizontal plane. The parametric study aims to provide guidance to the optimal design of jacket piled foundations: for instance, to examine the critical pile embedment beyond which limited improvement of the bearing capacity of the foundation can be achieved and to define the most unfavorable lateral loading direction. In addition, the limitations of the commonly assumed constant p-multiplier, regardless of the lateral deflection of the pile and the depth along it, are critically discussed. Then an improved analytical model is proposed, based on the existing model used in design and the parametric study results, to quantify the variation of p-multiplier with depth and with pile deflection.

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay: Calibration on Target Reliability Index

Reliability of the offshore jacket platform based on load combination

Reliability of offshore jacket platforms subjected to seismic action

Reliability of Pile Foundation of Offshore Jacket Platforms Subjected to Seismic Action

Strength Analysis of a Certain 350 ft Jack-up Offshore Platform Jacking System in Emergency Lifting Process under Different Working Conditions

Aseismic Reliability Analysis Approach for Offshore Jacket Platform Structures

Design Method Reliability Assessment from an Extended Database of Axial Load Tests on Piles Driven in Sand

System Reliability Analysis Method for Offshore Jacket Platforms under Extreme Loads

Reliability Analysis of Foundation Structures of Offshore Long-span-bridges on Serviceability Limit States

Reliability evaluating of a jacket platform example

A new approach for dynamic reliability analysis of offshore platforms

Design of foundation structures of sea-crossing bridges on serviceability limit state

Analysis of dynamic reliability of offshore jacket platforms subjected to seismic action

System Reliability-Based Assessment On Single Point Mooring Jacket Platform

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

A Method for Analyzing System Reliability of Existing Jacket Platforms

System Reliability-Based Assessment On Existing Jacket Platform

System Reliability Analysis Of A Tension Leg Platform

System reliability analysis for damaged platform structures

Time-dependent reliability assessment of offshore jacket platforms

Fatigue life reliability analysis of single point mooring offshore jacket platform structures