Abstract:Summary Acceleration measurements are often used for model updating of civil engineering structures, especially in the case of seismic monitoring. It is yet unclear if accelerations alone would generate an accurate and robust finite‐element (FE) model. This study examines this notion and analyzes the possibility of using other vibration monitoring data for model updating of shear‐wall tall buildings. This study compares the accuracy and robustness of the FE models being optimized via accelerations, roof displacement, wall rotations, interstory drift ratios, and the linear combination of these measurements. A numerical case study is analyzed using Timoshenko beams for modeling the lateral vibration of a benchmark 42‐story building under seismic excitations. Results show that the acceleration response of the examined building is mostly governed by its higher vibration modes. Depending on the characteristics of ground motions, using accelerations alone may generate an FE model biased towards higher‐order modes without effectively capturing the lower‐order modes. For instance, the first modal frequency of the updated FE model could be 12.0% lower than the true value, and the reconstructed displacement and rotation responses are noticeably inaccurate. Employing multi‐source monitoring data for model updating, for example, the combinations of roof displacement and acceleration measurements, could reduce the normalized root‐mean‐square errors in displacements by more than 70%. This study also quantifies the robustness of the FE model under various measurement noise levels and 50 pairs of earthquake records. Finally, the effects of multi‐source data on FE model updating are validated via experiments on a 7‐story shear wall building. Analysis reveals that a more accurate and robust FE model can be determined via a combination of accelerations and top displacement than via acceleration alone.

Random response analysis based model validation and structural optimization of a vibration fixture

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Control Strategy for Multi-Exciter Random Vibration Test

Response Adjustable Performance of a Visco-Elastomer Sandwich Plate with Harmonic Parameters and Distributed Supported Masses under Random Loading

Response Characteristics of a Sandwich Plate with Visco-Elastomer Core and Periodically Supported Masses under Random Excitation

Response Of Multiple-Degree-Of-Freedom Flexible Structures To Random Excitation

Structural modal identification and MCMC-based model updating by a Bayesian approach

Utilization of modal stress approach in random-vibration fatigue evaluation

Vibration Frequencies Optimization of Bus Structure Using Sequential Response Surface Method

Optimization and Robustness Analysis of Powertrain Mounting System

An efficient modelling approach to obtain dynamic properties of equipment coupled to the bogie of vehicle

Enhanced Subspace Iteration Technique for Probabilistic Modal Analysis of Statically Indeterminate Structures

A Monte Carlo simulation method for non-random vibration analysis

Development and testing of a novel vibratory compaction instrument considering its natural frequency

Fatigue reliability analysis and optimization of vibrator baseplate based on fuzzy comprehensive evaluation method

Vibration MO VIC 2 O 14 IA 13 Robust Optimization Towards Reducing Response Variation By Efficient NURBS Finite Element Inverse Analysis

Dynamic sensitivity-based finite element model updating for nonlinear structures using time-domain responses

Structural Model Identification Using a Modified Electromagnetism-Like Mechanism Algorithm

Model updating of a shear‐wall tall building using various vibration monitoring data: Accuracy and robustness

Robust Optimization of Planar Constrained Mechanical System with Varying Joint Clearance Size Based on Sensitivity Analysis

H2 norm based parameter optimization of multiple tuned mass dampers for resonance suppression