Abstract:A numerical model of an iron bath smelting reduction furnace with side-bottom combined blowing was established to study the influence of blowing arrangements on the stirring effect of the molten pool, and the accuracy of numerical simulation was verified by water model experiment. By comparing the flow field of molten pool with single nozzle, double nozzles (symmetrical and asymmetrical), and four nozzles (symmetrical and asymmetrical), the proportion of dead zone, average turbulent kinetic energy, and mixing time, the results show that asymmetrical bottom blowing is better than symmetrical bottom blowing, and the effect of double nozzles bottom blowing was better than that of four nozzles bottom blowing. The mixing effect is the worst under the condition of single nozzle. When the bottom blowing is asymmetrical with double nozzles, the mixing time is the shortest. Under the condition of double nozzles asymmetrical bottom blowing, when the insertion angle and depth of side lance are larger and deeper, the velocity streamline of molten slag layer is denser and the value is larger; meanwhile, the reflux of molten iron layer is larger, the proportion of dead zone is smaller, and the whole molten pool is fully stirred. When the insertion depth of the side lance is deeper, the gas holdup in the molten pool is greater and the stirring of the molten pool is more intense, while the insertion angle has little effect on the gas holdup. By comparing the influence of different side blowing conditions on the slag layer, it is found that the slag layer is divided into two layers by double-layer side lance, with the critical surface of the slag layer at about 200–260 mm from the bottom, and the insertion depth of the lower side lance has a greater influence on the layering of the slag.

Study on Modelling of Fluid Flow in Iron-bath Smelting Reduction Furnace with Multi-phase Model

Numerical simulation of multiphase flow in bottom-blowing furnace for lead smelting

Numerical Simulation of Multiphase Flow in Ironmaking Process for Oxygen-Rich Side-Blown Bath Smelting Furnace

Numerical simulation of flow characteristics of side-bottom combined blowing in iron bath reactor

Mathematical Simulation on Flow Behavior of Immersion Side-blowing in Iron-bath Smelting Reduction Furnace

Modelling of Multiphase Flow in Ironmaking Blast Furnace

Numerical Simulation and Experimental Investigation of Multiphase Flow in an Oxygen-Rich Side-Blown Bath Smelting Furnace

Experimental Study on Fluid Flow Characteristics in the Smelting Reduction Furnace by Water Model

Numerical Simulation Study on Immersed Side‐Blowing in C‐H2 Smelting Reduction Furnace

A 3D CFD Simulation of Liquid Flow in an Ironmaking Blast Furnace

Mathematical Modeling on the Multiphase Flow during Top–Bottom Combined Blowing Basic Oxygen Furnace Steelmaking Process

Computational Fluid Dynamics Simulation of Gas–Matte–Slag Three-Phase Flow in an ISASMELT Furnace

Numerical Simulation and Single Factor Influence Analysis of Multi-phase Flow in Copper Top-blown Furnace

Investigation of Mixing Phenomenon Using Water Model of C‐H2 Smelting Reduction Furnace

Influence of lance arrangement on bottom-blowing bath smelting process

Modelling Ironmaking Blast Furnace: Solid Flow and Thermochemical Behaviours

Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag–Metal Bath in Steelmaking BOF Process

Numerical Simulation of Bottom-Blowing Stirring in Different Smelting Stages of Electric Arc Furnace Steelmaking

Mathematical Modeling of Iron and Steel Making Pocesses. Modelling of Liquid Flow in the Blast Furnace. Theoretical Analysis of the Effects of Gas, Liquid and Packing Properties.

Numerical simulation and structural optimization of gas-liquid two-phase flow in reduction furnace of lead-rich slag

Numerical Investigation Of The Transient Multiphase Flow In An Ironmaking Blast Furnace