Abstract:Purpose - The purpose of this paper is to design a reasonable joining path and achieve assembly automation for multiple arc-shaped panels. A fuselage panel is primarily composed of skins, stringers, frames and clips. Both inserted and nested structures are adopted in the panels to improve the strength and hermeticity of the fuselage. Due to the complex structures and relationships, it is a challenge to coordinate the arc-shaped panels in the assembly process.Design/methodology/approach - A motion sequence model which achieves arc approximation based on the relative motion of multiple panels is established. The initial position of the panels is obtained by decomposing the computer-aided design model of the panels. Two translation rules, i.e. progressively decreasing translation and limited deformation translation, are applied to determine the moving path of the panels. If a panel is not at its path node, a search algorithm is used to find the nearest path node. Finally, the key algorithms are implemented in an integration system to promote joining automation of multiple panels.Findings - The zigzag path is effective for the joining of multiple panels with complex mating relationships. The automation of the join-separate-rejoin operations is time-saving and safety-assuring. The proposed method is demonstrated in practical engineering and a good efficiency is obtained.Practical implications - This method has been used in a middle fuselage assembly project. The practical results show that the zigzag path is convenient to be stored and reused, and the synchronous movements of multiple curved panels are precisely realized. Additionally, the posture accuracy of panels is significantly improved, and the operating time is reduced considerably.Originality/value - This paper gives a solution including path planning and process integration to solve the joining problem of multiple panels. The research will promote the automation of fuselage assembly.

Self-defining path layout strategy for thick plate arc welding robot

Path Planning Optimization for Teaching and Playback Welding Robot

Motion navigation for arc welding robots based on feature mapping in a simulation environment

A Zigzag Path Based Joining Method for Fuselage Panels in Digital Assembly

Multi-Pass Path Planning for Thick Plate by Dsaw Based on Vision Sensor

Adaptive path planning for the gantry welding robot system

Online obstacle avoidance path planning and application for arc welding robot

A novel seam extraction and path planning method for robotic welding of medium-thickness plate structural parts based on 3D vision

An Approach for Solving the Three-Objective Arc Welding Robot Path Planning Problem

Laser Scanning–based Robot Welding Path Planning for Complex Saddle–shaped Weld Seams

Path Planning for the Gantry Welding Robot System Based on Improved RRT*.

A novel welding path generation method for robotic multi-layer multi-pass welding based on weld seam feature point

Research on GMAW Based Non-Supporting Thin-Wall Structure Manufacturing

Multi-Layer Welding Path Correction of Medium-Thick Plate Based on Vision System

Dual-Objective Collision-Free Path Optimization of Arc Welding Robot

A novel system for off-line 3D seam extraction and path planning based on point cloud segmentation for arc welding robot

Weld Seam Profile Detection and Feature Point Extraction for Multi-Pass Route Planning Based on Visual Attention Model

Planning of circle locus for multi-path/multi-layer welding robot with automatical error-correction

COLLISION-FREE PATH PLANNING FOR ARC WELDING ROBOT BASED ON IDA-DE ALGORITHM

Geometric model of robotic arc welding for automatic programming

Kinematics Analysis and Trajectory Planning for a Welding Robot for Girth Welding of Box-Type Steel Structures