Abstract:Despite widespread industrial applicatzon of harmonic drives, the source of some elastokinetic phenomena and their impact on overall system behavior has not been fully addressed thus far. Some of these phenomena severely influence the behavior of robot arms, both in free and constrained motions, when the end effector is in contact with an environment. The primary goal of this study is to derive an effective, control-oriented model of a harmonic-drive-based robot joint. Systematic observations of an experimental robot with harmonic drives has revealed that the harmonic drive could not entirely transmit the input torque to the output shaft, due to a nonlinear meshing process between the flexible and circular spline teeth. The torque transmitted to the output shaft might saturate at a much lower value than expected (e.g., motor torque multiplied by the gear ratio). This phenomenon may severely influence the system behavior, par ticularly in force/impedance control tasks when full joint-torque capacity and wide bandwidth are needed. To understand the harmonic-drive behavior, as well as to derive a convenient form of its model, we have shown restrained motion experi ments to be much more useful than free-motion experiments. In this article, we also introduce mathematical models and describe experiments related to other physical phenomena, such as nonlinear stiffness, hysteresis, and soft windup. The goal of our modeling strategy was not to develop a precise and possi bly complicated model, but to generate an appropriate model that could be easily used by control engineers to improve joint behavior To visualize the developed model, equivalent mechan ical and electrical schemes of the joint are introduced. Finally, a simple and reliable estimation procedure has been established for obtaining joint parameters, to ascertain the integrity of the proposed model.

Mechanics Analysis of Two Different Stiffness Elastic Actuator in Frequency Domain

Random Vibration Control for Multi-Degree-of-freedom Mechanical Systems with Soft Actuators

Force Analysis And Experiment Of Variable Stiffness Soft Actuator Based On Particle Jamming

A Variable Stiffness Actuator Based on Leaf Springs: Design, Model and Analysis

Distributed Structural Dynamics Control of Flexible Manipulators—ii. Distributed Sensor and Active Electromechanical Actuator

An Experimental Study of Nonlinear Stiffness, Hysteresis, and Friction Effects in Robot Joints with Harmonic Drives and Torque Sensors

Numerical Analysis of an Exoskeleton Crank Slider Series Elastic Actuator with Clearance Joints

Analysis of the Dynamic Stiffness, Hysteresis Resonances and Complex Responses for Nonlinear Spring Systems in Power-Form Order

Elastodynamic performance of a spatial redundantly actuated parallel mechanism constrained by two point-contact higher kinematic pairs via a model reduction technique

Nonlinear Effects in Stiffness Modeling of Robotic Manipulators

A Novel Rotational Actuator With Variable Stiffness Using S-Shaped Springs

Stiffness match between electro-thermal micro-actuators and compliant amplifiers

The Analyse on Stiffness Model of 3-PPSR Flexible Parallel Robot

Dynamitic Model and Stability Analysis of Force-Driven Series Elastic Actuator

Free vibration of flexible two links manipulator with variable cross-sectional areas

Design and analysis of a novel variable stiffness joints with robots

Stability analysis of virtual passive actuator with time delay and parameter uncertainties.

Passivity guaranteed stiffness control with multiple frequency band specifications for a cable-driven series elastic actuator

Effect of Stiffness Variation on Satoregen Frequency for Traveling Wave Rotary Ultrasonic Motors

BSA -- Bi-Stiffness Actuation for optimally exploiting intrinsic compliance and inertial coupling effects in elastic joint robots

Analysis and experimental study on servo dynamic stiffness of electromagnetic linear actuator