Abstract:This paper is about the magnetic field analysis of an interior permanent magnet motor (IPM motor) by using the equivalent magnetic circuit method (EMC method), which requires a small amount of computation time compared with the finite element method (FEM). IPM motors have a specific shape of rotor in which the permanent magnets are embedded. Therefore, in the bridge region, the magnetic saturation is generated due to the shape of the permanent magnet, which affects the magnetic flux density distribution in the air gap and the characteristics of the IPM motor. Thus, to design an IPM motor, the magnetic saturation effects should be considered along with the rotor shape. In addition, because the rotor of the IPM rotates at a high speed directly in connection with the load, the stress generated from the rotor must be stably distributed. Consequently, according to the rotor shape characteristics of the IPM, the stress is concentrated in the thin bridge region during high-speed rotation. When the stress generated in the bridge region exceeds the yield stress of the rotor iron core material, the bridge part is destroyed. Therefore, it is important to analyze the stress that occurs in the rotor during high-speed rotation in the rotor design stage of the IPM. In this study, we analyzed the magnetic field characteristics of an IPM motor using its equivalent magnetic circuit while considering the magnetic saturation in the bridge region. The stability of the rotor was determined by presenting a safety factor based on the maximum stress generated at the rotor for each speed. We derived the stator natural frequency to evaluate the resonance possibility between the electrical frequency and the stator natural frequency. Finally, the validity of the constructed equivalent magnetic circuit was verified by comparing the results with those obtained via the FEM analysis and experiments.

Analysis of the Inductances of Interior Permanent Magnet Synchronous Motor

Analysis and Reduction of Inherent Shaft Voltage in Interior Permanent Magnet Synchronous Machines

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

FEM Analysis and Application of Saturation Effect PMLSM Winding Inductance

Computation of Permanent Magnet Brushless DC Motor Design Allowing for Inductance

Comparison Of Axial Flux Pm Synchronous Motor And Induction Motor By Mathematical And Finite Element Analysis

Overall Electrical Parameters Identification for IPMSMs Using Current Derivative to Avoid Rank Deficiency

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

Inductance Calculation in IPMSM Considering Magnetic Saturation

Armature Inductance Measurement of Permanent Magnet Synchronous Linear Motor

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Interior Permanent-Magnet Synchronous Motor Design for Improving Self-Sensing Performance at Very Low Speed

D-Q axis Inductance Analytical Calculation for Fractional-slot Distributed Winding IPM Motor based on Big-small Pole Space Method

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Electromagnetic and Mechanical Analysis and Measurements of Interior Permanent Magnet Motors Based on Equivalent Magnetic Circuit Method

Study on Winding Inductances in Stator Surface-Mounted Permanent Magnet Machines

Analysis of Inductance Variation in Permanent Magnet Linear Synchronous Motor

Design and Analysis of a Transverse-flux Permanent Magnet Motor With Hybrid Iron-core

Magnetic Field Analysis of an Inner-Mounted Permanent Magnet Synchronous Motor for New Energy Vehicles

Online Identification of Inductance and Flux Linkage for SPMSMs Decoupled from Resistance Voltage Drop and VSI Nonlinearity